Growling vibration noise.

[icemanftr]

No I'm not running factory prop. 😀 Acme 1617 2013 LSV. Here's a video of it in drivers seat. You can really notice it at surf speed (3k rpms) when sacked out. Seems like it's only apparent when heavily weighted. https://vimeo.com/173108256


Sent from my iPhone using Tapatalk

[icemanftr]

https://vimeo.com/173108482

Another video from rear and harder to hear from water and engine. I do have FAE so it's not as loud.


Sent from my iPhone using Tapatalk

[Connolly_Crew]

https://vimeo.com/173108482

Another video from rear and harder to hear from water and engine. I do have FAE so it's not as loud.


Sent from my iPhone using Tapatalk

No sound



Sent from my iPhone using Tapatalk

[icemanftr]

https://vimeo.com/173127950


Sent from my iPhone using Tapatalk

[icemanftr]

Wtf is going on. Should be sound and none are working.


Sent from my iPhone using Tapatalk

[parrothd]

That's the sound of lots of ballast..lol
With a fae you hear a lot of stuff others can't..

[kaneboats]

I would start with making sure your drive shaft bolts are tight. They do work loose. Check at least twice a year. Then check the prop and shaft and the alignment.

We scraped the bottom slightly the other day when my son was idling near the boat ramp. I felt vibration above 3500 RPM. Figured it was the prop. Saw not much of anything-- maybe a tiny ding -- so I sent it in. They said one blade was pushed back and it would be hard to tell with your eye. $158 later it's fixed.

[icemanftr]

I will check all that. Least sound is working now.


Sent from my iPhone using Tapatalk

[Isaguel]

Mine make strong vibration that shakes the steering wheel when i drive through heavily weeded area and i get weed tangled in prop. Put in reverse and voila, gone

Sent from my SM-G935P using Tapatalk