REv 10's on Mondo?

[vanlew]

Has anyone installed Rev 10s on a 2015 Mondo with the s tower. I have the 10"s with the swivel mount but just wondering the best way to mount to the tower. If i replace the Roswell's I would need to mount to the same bar that runs front to rear, but the wire presently comes out of the tower on the bar that runs side to side. The REV 10 mounts are designed for the wire to come into the swivel mount. Fish the wire through to the other bar? Or fly it through the air over to the speaker mount? other ways? Anybody done this yet?
Thanks

[MLA]

Im a little confused. You say you have 10" now but talk about replacing the roswells. Dont recall roswell making a 10"

In regards to wiring, the Wet Sounds X, TC3-F and TC3-F mounting are through the center of the pod/clamp.

[KG's Supra24]

If you want to maintain factory location ... you will use the swivel clamp and run into spacing/clearance issues between the tower and speaker clamp . Dusty had 3/4 inch spacer made.

The other option is using the tower clamps near factory location, drilling a hole in the tower for hidden install.

You have two factory location options on the s bend.

http://uploads.tapatalk-cdn.com/20160630/5baef82b236ec43d5a6f0647ac2a0eb0.jpg

http://uploads.tapatalk-cdn.com/20160630/bc543665210711247db7e6f638f13a10.jpg

http://uploads.tapatalk-cdn.com/20160630/0405d3b6bc4156e6bc6a3bfc2b60daee.jpg

http://uploads.tapatalk-cdn.com/20160630/96b665d5a0b4fff92d48abb575b4b1d3.jpg

Sent from my SM-G928V using Tapatalk

[KG's Supra24]

http://uploads.tapatalk-cdn.com/20160630/1a7bd8fd013cd7a5bac9c18a0ce7a6f0.jpg

http://uploads.tapatalk-cdn.com/20160630/8b76216a55db98c2c067feb14773b786.jpg

http://uploads.tapatalk-cdn.com/20160630/86011c122d953879a2c65511ffc3909c.jpg



Sent from my SM-G928V using Tapatalk

[hammj1]

I know it’s a long shot, but does anyone have the dimensions for those spacers or have the fixed swivel mounts for the rev 10s that can get them for me? I’d like to get them fabricated before I order them.