PDA

View Full Version : Separating tower light.



BrokeGuy
05-10-2016, 09:34 PM
Alright the Sbend tower light has bothered me long enough. This article is for giving the tower like a dedicated switch.

On starboard side remove seat bottoms. Remove two screw which are circled below, lift panel up and set aside.http://uploads.tapatalk-cdn.com/20160511/4c10d70506607685ab83575a8b5e9ac6.jpg

Remove two screws to remove speaker box. The speaker box was tough coming out. I left speakers on the box however I would recommend removing the speakers.
http://uploads.tapatalk-cdn.com/20160511/0af2bd44d9c304a185d34d23522cc1ab.jpg

Now you can see the wiring harness that is coming down from the tower. Notice the wiring color.http://uploads.tapatalk-cdn.com/20160511/2f60a0aea60175872aba906be6e2e78f.jpghttp://uploads.tapatalk-cdn.com/20160511/b0d0cdc6e2fbcf0b6f4414c57e8b3a66.jpg

BrokeGuy
05-10-2016, 09:35 PM
Locate the wiring harness coming from the tower. Look for a solid blue wire which is connected to a blue wire with a white tracer. Blue wire with white tracer is the power from the switch. Cut the wire and cap off the blue/white wire.http://uploads.tapatalk-cdn.com/20160511/c20e06b70280b8d22571b6236c396973.jpg

Grab some 14g wire and connect to the solid blue wire. Run the wire along the harness which runs toward the front with cable ties.http://uploads.tapatalk-cdn.com/20160511/0cd06c8780131990cbffe162f693a91b.jpg

Switch location is your choice. I used the 3rd switch over from Port side which is just right of the court light switch. Used a female spade connect to connect to the bottom lowest terminal on the preferred switch.http://uploads.tapatalk-cdn.com/20160511/8ef0400601b80755a9efa6deae24e4e6.jpg Note I'm using red wire also there was a wire connected to the switch I wanted to use. I just moved it over. Hopefully you guys will get some use out of this. For me I wanted the tower light on a dedicated switch. It was detracting at night.

2016 Moomba Craz
Gunmetal W/ flake
Atomic Orange Accent
Black Deck and Hull

Fastest1
09-16-2017, 07:38 AM
My 2008 is wired to a 2 way switch. I choose between just the bow light or both.

jmvotto
09-16-2017, 08:35 AM
My 2008 is wired to a 2 way switch. I choose between just the bow light or both.


Mine too. It the law at nice to have both bow and high point lights on , not sure why you would need it seperate

Fastest1
11-03-2017, 05:51 PM
I believe if anchored, the bow light isnt necessary.


Sent from my iPhone using Tapatalk Pro

Casey B
04-27-2018, 06:45 PM
Great post, I split mine out today. Thanks for the information.