Cleaning out the garage. Lots of miscellaneous items

[mmandley]

Mostly Ballast items.

First on the list.

2 Enzo 1500s, these are in perfect condition, they fit in the Mojos and fill your entire V drive, plus the length of the seats. On the drivers side there is about a foot left of storage, same on the observers side except that compartment is longer. I don't have an accurate length as I have a 3 battery box built in that location.

Want Maximum waves, these are your bags.

$400 for both, will ship Lower 48.

2 Factory Black 650 V drive bags, New condition, I honestly never filled these, they were out of the boat when I took delivery.
$100 takes them both, will ship to lower 48

2 Sump 900s these have 1 inch internal opening, plus a vent connection on top, and push button vent. No issues with these at all, they fit in the V drives just like 1100s would. They are softer material then Fly High so it makes it much easier to remove, clean, fold them at the end of the season.

$150 takes them both will ship to lower 48.
Might be spoken for if CFTD doesn't take them they are open to the public.
Will ship to lower 48

New Tsunami Pump, never opened.
$20 will ship lower 48
http://i639.photobucket.com/albums/uu114/mmandley/Things%20for%20sale/20160302_163630_zps6ppasowz.jpg (http://s639.photobucket.com/user/mmandley/media/Things%20for%20sale/20160302_163630_zps6ppasowz.jpg.html)

2 3-way valves to direct water to 2 different bags off 1 pump. 3/4 flow, 1 inch outside diameter.
$30 for both will ship Lower 48
http://i639.photobucket.com/albums/uu114/mmandley/Things%20for%20sale/20160302_163657_zpstnc22woi.jpg (http://s639.photobucket.com/user/mmandley/media/Things%20for%20sale/20160302_163657_zpstnc22woi.jpg.html)

2 3/4 Check valves
$20 for both will ship lower 48
http://i639.photobucket.com/albums/uu114/mmandley/Things%20for%20sale/20160302_163835_zpsmiqevcrh.jpg (http://s639.photobucket.com/user/mmandley/media/Things%20for%20sale/20160302_163835_zpsmiqevcrh.jpg.html)

[mmandley]

Agenda Surf Board padding, can also be used as a step pad, or anything you desire.
4 pieces 2 are 1/4 thick, 2 are 1/2 thick. Free to a good home.
http://i639.photobucket.com/albums/uu114/mmandley/Things%20for%20sale/20160302_163518_zpspnqij7pc.jpg (http://s639.photobucket.com/user/mmandley/media/Things%20for%20sale/20160302_163518_zpspnqij7pc.jpg.html)

2 Sea Deck material step pads
Free to a good home
http://i639.photobucket.com/albums/uu114/mmandley/Things%20for%20sale/20160302_163549_zps9esnmsfl.jpg (http://s639.photobucket.com/user/mmandley/media/Things%20for%20sale/20160302_163549_zps9esnmsfl.jpg.html)

1 Chrome through hull fitting.
3/4 inside diameter, 1 inch outside were you clamp the hose. Requires a 1 inch opening to mount this.
$10 will ship lower 48
http://i639.photobucket.com/albums/uu114/mmandley/Things%20for%20sale/20160302_163820_zpsodeushus.jpg (http://s639.photobucket.com/user/mmandley/media/Things%20for%20sale/20160302_163820_zpsodeushus.jpg.html)
http://i639.photobucket.com/albums/uu114/mmandley/Things%20for%20sale/20160302_163812_zps5zydzjgn.jpg (http://s639.photobucket.com/user/mmandley/media/Things%20for%20sale/20160302_163812_zps5zydzjgn.jpg.html)

[mmandley]

Last but certainly not lease.

The original version of the Exile ZLD.

This is the first rendition, uses a Fader style concept to adjust power to and from the Cabin / Towers. You can turn one down while the other stays at normal Volume.

Also comes with Separate Sub volume control.

$100 will ship to lower 48 <sorry pics are a little blurry on this, camera was having issues focusing with the low light. I can get better pics if you like.

http://i639.photobucket.com/albums/uu114/mmandley/Things%20for%20sale/20160302_163933_zps2j5wpaai.jpg (http://s639.photobucket.com/user/mmandley/media/Things%20for%20sale/20160302_163933_zps2j5wpaai.jpg.html)

http://i639.photobucket.com/albums/uu114/mmandley/Things%20for%20sale/20160302_163944_zps4icszpgu.jpg (http://s639.photobucket.com/user/mmandley/media/Things%20for%20sale/20160302_163944_zps4icszpgu.jpg.html)


I have a lot of fittings for various bags, 90s, straight, and the likes. I will post those soon. I need to get to them and get a count on what exactly I have to get rid of.

[mmandley]

900s are sold sold.

[brain_rinse]

Lots of great stuff here, Mike! I could use the agenda and sea deck and promise to put it to good use.

[mikenehrkorn]

I could certainly use the pads if you have any left.

[mmandley]

900s
3 way valves
check valves
agenda pad
seadec pads all gone

[tarheelskier]

Pm sent....

[Thegerman618]

Would you consider selling only 1 of the Enzo's?

[chester]

Let me know what you have for bag fittings? I'm looking for a little of everything, (1" NPT plug, flow rite bag fitting, 1" quick connects) and would gladly take them off your hands. Thanks!

[mmandley]

WOW this blew up in the last 18 hours LOL.

Updated list.

900s Sold
Check Valves Sold
650s Sold
3 Way Valves Sold
Enzo 1500s Sold
Sea Deck / Agenda Pads Sold


Whats left is
Through Hull Fitting
ZLD
Aerator Pump

I have replied to everyone asking for the gear, Pay Pal that money with your address I plan to ship everything on Monday.

[mmandley]

New Item

IBS bag, this is the 650 U shaped bags for under the seats in the bow of the boats.

This is the Wake Makers Link
https://www.wakemakers.com/fly-high-integrated-bow-sac.html

$150 takes it, will ship Lower 48

[Thegerman618]

^^^awww man, I just bought this sac from WM last week after months of searching :cry:

[mmandley]

^^^awww man, I just bought this sac from WM last week after months of searching :cry:

Are you referring to the IBS Bag?

It just Sold as well.

All thats left is

Through Hull Fitting
ZLD
Aerator Pump

[mmandley]

Just letting those of you who purchased items, they are all boxed and waiting on Shipping, I ship everything out of the Exile warehouse, they received a large inventory load in on Monday and I missed the Fed Ex guy.

Brian said he was going to ship everything ASAP but hes running behind, since my stuff is not product it waits on Exile Customers.

Spoke with Brian today and he is planning on all my < your > things to go out today. As soon as I get tracking numbers I will forward those.

Thanks for understanding just wanted you all to know I am waiting on shipping labels, your stuff is ready otherwise.

[mmandley]

Just an Update,

All items have been shipped out, couple guys already said they received their items, I never got a copy of my Shipping they shipped the items, I am still trying to get that info. I apologize as normally I always ship my items and have all the info, but the storm of a container with product for other customers landed and I got mixed in with all that shipping so I wasn't able to get the numbers first hand. I feel horrible I didn't get the tracking numbers mailed out to everyone.

If for any reason the the items don't show up this week, please please PM me and I will make it right.

Thanks

[Thegerman618]

MMandley, I just sent you PM and I am all messed up as I currently have 5 things en-route to my place for my ballast system and getting tracking numbers crossed. What I thought I had I don't it was for different item as I now understand from the previous post. Thanks for the update, no worries it will get here when it gets here. I am just south of you a bit I suspect NLT end of week as you stated. Thanks again.

[mmandley]

Seems we had a shipping mistake, if you got more then you asked for shipped to your home, please contact me. I will pay you to ship it to the correct person.

I know 1 Enzo was shipped to the wrong person and thats been fixed.

I shipped some 3 way valves and check valves as well, and that person didn't receive them.
I am working through the tracking info I have to figure out were it went but if you got 2 packages by mistake please let me know.

Thanks

Sorry this has happened, I have never had shipping issues before.

[KG's Supra24]

I have never had shipping issues before.

You must pick up all your gear at the store, huh :o :o :twisted:

[mmandley]

You must pick up all your gear at the store, huh :o :o :twisted:

Ohh I have had shipping issue TO me but when I sell gear to people I have never had a shipping issue.


Ohh wait I get your poke punn there LOL.

Why Yes, Yes I do get my gear at the store.

But I can say I have had to wait months and months for my gear due to other customers getting gear first and me being local so i can wait because its raining still LOL.

Also i have had certain people come over for winter parties and leave with all my gear in my boat, told its Demo gear now LOL.