PDA

View Full Version : Help with balast settings



trutchy
02-07-2016, 03:07 AM
Hi Guys,

I have a 2015 Mondo and I just cant seem to get a clean wake, there is no way I can let go of the rope and maintain a surf! The sales rep just keeps sending me tips but no luck and although I try to get him on the boat he never turns up.. So can you guys help..??

So lets say a want to wakesurf on the port side of the boat.

1. What should the ballast be set at (Port, Starboard, and front)?
2. Should the wake plate be up or down?
3. What setting should the flow surf be set at on each side?
4. Do i need a few poeple in the boat and if so where to I place them?

Thanks
ryan

JD14Mondo
02-07-2016, 10:13 AM
I have a 14 with manual flow. I have 900's in both rear lockers and 750 ibs. Port side surfing I run port side full, starboard side 80% full, front and ibs full. Flow in third position and about 10.4 mph. If only a couple of people in boat I have them sit port side. Goofy side likes more lean. Starboard side full, port side 30% and run about 11 mph. Since adding ibs and 900's it really makes a good wave.

MLA
02-07-2016, 10:36 AM
Whats your experience level and what board are you riding? Any pics of you riding?