View Full Version : Boatmate trailer - tire pressure

10-04-2015, 09:24 PM

I have the single axis Boatmater trailer for my LSV.
I was looking for the proper tire pressure on the tires however what I see on the tire wall is a mx pressure of 65 psi.
Where can I find the proper normal pressure I should inflate the tires to.



10-04-2015, 10:33 PM
From everything i have read over the years, you should keep the tires inflated to close to the max psi. You can google it and i believe that is the general consensus.

10-05-2015, 10:21 AM
I keep mine at 60 psi

Sent from my SM-G730V using Tapatalk

10-05-2015, 10:31 AM
I keep mine at 60 psi as well.

10-05-2015, 01:30 PM
I have a dual axle boatmate, and the tires say max 50, so that's what I set them at. Of course, this was after having them at 40 psi since I bought the boat in February this year. I finally decided to google it, and the concensus is to run them at the max pressure.

10-05-2015, 07:05 PM
Thank you for the quick replies.

60 psi it will be!

10-09-2015, 02:23 PM
I keep mine at 60 as well

Sent from my SM-G920V using Tapatalk

10-11-2015, 10:29 PM
As a side note, read your tire wall and make sure you aren't exceeding the max psi (I doubt you are, but always worth double checking)

Sent from my iPhone using Tapatalk