jelmhorst
09-27-2015, 12:10 PM
I've got a call into the fine folks at FAE for some help but being Sunday it may be slim pickings, which I completely understand. For the initial step of drilling the holes through the plastic exhaust and metal insert, did you drill the holes with everything on the boat or remove the screws and then drill? I started to unscrew everything and started to pull the plastic off but seeing as how it was tight I figured I better ask before I do something I may regret later.
I'm a visual learner and the instructions leave a few blanks so I will likely have more questions coming. For those of you with the side mount, where did you position the square tube in relation to your brackets? As always if pictures are available, I am grateful. Thank you all for the assistance and the patience lol. MMandley's nice writeup was helpful, I'm just not off the ground yet.
I'm a visual learner and the instructions leave a few blanks so I will likely have more questions coming. For those of you with the side mount, where did you position the square tube in relation to your brackets? As always if pictures are available, I am grateful. Thank you all for the assistance and the patience lol. MMandley's nice writeup was helpful, I'm just not off the ground yet.