View Full Version : Bent Tracking Fins?
06-20-2006, 05:51 AM
I took my 06 Outback in for a 20 hr service today. While looking over the boat, the guy at the shop noticed that the middle (of three) tracking fin was bent. I don't ever recall hitting anything and there were no apparent scares on the fin. I was told this might be a warrenty issue, but it is up to SC. Has anyone else run into this issue?
06-20-2006, 10:40 AM
I would think that if one of the tracking fins is bent you would have either had to really whack something or had a really messy trailoring... If these things havent happened then it really sounds like a warranty issue. I havent heard of this problem before but, that doesnt mean it cant happen. This board is full of one of a kind experiences with all models... One thing that seems to be the case, regardless is Skiers Choice looks after us really well.
Good luck, let us know the outcome!!
06-20-2006, 11:07 AM
With the middle fin to be the only one bent that would require a localized lateral force on the affected fin (like a forklift shot). I can't imagine a fin bending without damage to the hull at the mounting location. If the fiberglas around the mounting is good, I would assume the fin was bent prior to installation and not noticed or is mounted incorrectly. I would say that the problem occured somewhere besides on your trailer or on the water.
Powered by vBulletin® Version 4.2.3 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.