PDA

View Full Version : Wake plate is not moving.



Leirhiht
08-10-2015, 01:18 PM
Howdy yall!

New to the site and to boating, got an 08 mobius lsv 3 weeks ago everything works fine, right now...except the wake plate. The gauge for the plate shows to be all the way to the right. It seems to be straight still when I go under water and touch it. Gauge moves smoothly...
When I get the boat out of the water it is straight and the gauge is all the Way to the right. We test it while out of order and it doesn't move. I can hear small whining noise.

Any advice?
Thanks!

eblom
08-10-2015, 02:08 PM
Have you checked the fluid level for the wakeplate? Its in a clear gray plastic container near the ski pylon in the engine compartment... The mfg of the part is here... http://www.bennetttrimtabs.com/tech-help-support/ They are really helpful to troubleshoot...

Leirhiht
08-10-2015, 04:32 PM
Have you checked the fluid level for the wakeplate? Its in a clear gray plastic container near the ski pylon in the engine compartment... The mfg of the part is here... http://www.bennetttrimtabs.com/tech-help-support/ They are really helpful to troubleshoot...

Sweet! Thank you! I know I still need to learn alot more about this boat. Appreciate the tip hope that's the issue.

Leirhiht
08-17-2015, 09:12 PM
Have you checked the fluid level for the wakeplate? Its in a clear gray plastic container near the ski pylon in the engine compartment... The mfg of the part is here... http://www.bennetttrimtabs.com/tech-help-support/ They are really helpful to troubleshoot...

i checked the level and it is right according to bennetts website. went out sunday, tried to see if it would move while just floating in the lake and it did not. when i got out of the water and into the boat i could see the water mixing with a chemical, never seen that before while stopped. i didnt see it again that day because i didnt use the plate.