2015 Mondo -- Surf plate and ballast issue

[Mondo2015]

Anyone have issues with the new surf plates and ballast pumps

The last 2 times we went out we had issue with them not working at all - They have done it once before but seemed to reset when we turned the boat off.

This time, even after sitting off for days, the pumps wont pump in or out and the plates wont switch sides. Stuck on the right side.

Any way to reset the system. Almost 2 hours each way to take it to the dealer

[Mobius22]

Have you called the dealer to see if they know a quick fix? Sometimes it's something simple like turning your batteries off and then back on to reset everything. Also, if nothing is moving then you may want to make sure the battery is fully charged as well.

[wolfeman131]

pop the main breaker and reset

[Mondo2015]

Have you called the dealer to see if they know a quick fix? Sometimes it's something simple like turning your batteries off and then back on to reset everything. Also, if nothing is moving then you may want to make sure the battery is fully charged as well.

Called the dealer - sounds like Im stuck taking it in. Tried completely disconnecting the batteries, checked the breakers, tripped and reset the main and ballast breakers. Weird...

The screen shows the timers going up and down and shows the plates changing from port to stbd but nothing actually moves..

Was hoping someone on here would have a reason for it.

Thanks