2015 Mojo Ghetto Flow 1.0

[nitrodude24]

ALRIGHT SC has changed the flow now time to experiment on my outdated mojo lol.

22531


will report results back. I enlarged the tabs to help offset the larger rear bags which mine are 1100s to facilitate transfers will the heavier weight. I have also put a diverted on the inside lip of the tab

[Boonejeepin]

Good luck. I am sure you will find a shape that gives improvement.


Sent from my iPhone using Tapatalk

[jmvotto]

Is this an auto flow revamp ?

[cpropes2005]

I like it! I am glad I am not the only one that is already looking at changing the tabs out on what is basically still a brand new boat. It is hard to tell just from looking at the pictures but my dealer had a Craz side by side with my 2015 Mojo when I picked it up the other day and the "Autoflow 2.0" tabs are at least twice as big as the ones on my Mojo. The mounting hardware all looked the same and I asked if I would be able to order just a set of the new tabs but they didn't know yet if that was going to be possible so I will probably end up going the same route as you and just making something. What material are you using?

[nitrodude24]

1/2 HDPE it's a work in progress...you can't go outside any causes spray at the rear of the boat. Here is the first picture I very seen of the new mojo tabs and they are a lot bigger22627

[cpropes2005]

Any testing results to share?

[Gettin' It]

Following, also trying to fabricate new tabs.