View Full Version : 2013 Supra SA

07-13-2015, 10:21 AM
I'm wondering if you can take a 2013 to a dealer and get the swell system put on it. Does anyone know if this is possible?

Sent from my iPhone using Tapatalk

07-13-2015, 10:42 AM
If memory is correct I do not think the computer system in the 13 will work with the swell system.

07-13-2015, 11:26 AM
You can on 14's but not 13's due to electronics and other reasons. I've seen people add the manual flow system though

07-13-2015, 11:50 AM
you can add a manual flow to a Supra hull?

how is that accomplished?

07-13-2015, 01:45 PM
The original swell was tested on the original SA. That was summer of 12 for the 13 model. If I recall Swell is for 13 on up.

The Auto Flow is only 14 up Moomba due to the dash computer change in 14.

07-13-2015, 01:58 PM
Custom... I've seen one in Texas that did it, so it's possible but obviously not common

07-13-2015, 02:00 PM
Mike, fairly certain that you cannot add the swell to 2013 SAs. Only 14 and up

07-13-2015, 06:19 PM
Mike, fairly certain that you cannot add the swell to 2013 SAs. Only 14 and up

I might be mistaken but I know for a fact the SA I tested in Oct of 12 was the Test mule for the Swell system. Also when I was trying to get the Auto Flow for the Mojo I was talking to SC directly trying to make it work and they said Auto Flow was a 14 up due to its computer, but the Supra have a completely different computer due to its touch screen and it was only a program flash update. Like I said I might be mistaken and the best way to know is Email SC direct but I am pretty certain the Supra is a 13 on up update and Moomba were 14+ update.