PDA

View Full Version : 2007 XLV Swivel Seat Modification-- super fast and easy



kdcdds
06-19-2015, 09:27 AM
ok, i have read the swivel seat mod stuff on here, and i kinda have my own spin on it. this took approximately 2 hours to complete, except time to gather materials, etc.
Materials:
2 9 x 11.5 x 5/16 aluminum plates--metal fab shop, cost about 25 bucks2226022261
4 1 1/4" to 1 1/2" bolts, machine head
16 lock washers
20 larger diameter machine washers
hack saw, undercut saw, sawsall--for removing ends of bolts
swivel-- 10 bucks at any boat store





1. take plates and match existing harware locations
2. take plates and match swivel
3. drill holes
4. mount swivel
5. cut off bolt ends
6. attach plate to boat seat rails
7. add machine washers under lower plate (between plastic spacer and lower plate), as needed to level seat. i think i used 6 on each side.
8. cut off bolt ends
9. attach seat to upper plate
10. enjoy

Fastest1
06-20-2015, 01:43 PM
Does your swivel lock or have multiple positions?

mjr119
06-22-2015, 08:30 AM
Would this work on a LSV?

XLV08
06-06-2016, 07:18 PM
I would love to do this. Any more pictures?

kaneboats
06-07-2016, 01:18 PM
ok, i have read the swivel seat mod stuff on here, and i kinda have my own spin on it.

HA! I saw what you did there. Nicely played.

kaneboats
06-07-2016, 01:18 PM
Would this work on a LSV?

Depends on which year/seat you have. I know it works on 2008.