View Full Version : Fittings stuck in bags
rdlangston13
06-01-2015, 03:33 PM
I bought some 650 lb bags from a buddy go upgraded to 1100s in his mojo and I need to replaced the 1" vent connection with a 3/4" one. I cannot get the stock 1" connection out of the bag. It appears that they glued them in??? How do you get these off????
Sent from my iPhone
996scott
06-01-2015, 04:10 PM
https://www.youtube.com/watch?v=qpW_x9MeAQo
works pretty good. I think I used the hair dryer for like 10 min or so to soften the glue. On a few of mine after I put the new fitting in I would get a little water leaking from the new fitting. Wakemakers said to get some PVC pipe glue. You need the kind that comes in a two part system (primer and glue) and only use the glue, NOT the primer. I've used it and it worked great.
beat taco
06-01-2015, 06:47 PM
Doesn't work with flip flops!
996scott
06-01-2015, 06:57 PM
or bare feet, too hot!
rdlangston13
06-02-2015, 01:14 AM
It does not work nearly as easily as they make it look in the video but I got them out
Sent from my iPhone
Fastest1
06-04-2015, 08:54 AM
It does not work nearly as easily as they make it look in the video but I got them out
Sent from my iPhone
This is a classic sign of "experience".
Watch any good musician up close and notice their fingers dont seem to do anything yours cant do? Makes you feel inspired enough to go home and try playing an instrument only to find he made it look easy.
kaneboats
06-04-2015, 10:33 AM
Those fittings don't come out till you get angry enough to destroy the bag if necessary-- then presto! They come out.
jmvotto
06-04-2015, 10:50 PM
It does not work nearly as easily as they make it look in the video but I got them out
Sent from my iPhone
Have to let the glue get warm , Hair dryer 10 minutes on the fitting , boom. Out comes the fitting .
One beer job:o
rdlangston13
06-05-2015, 01:00 AM
I had the hair dryer on there for 15 minutes and it was not "presto". It was a little more how Kaneboats described it. I was worried I was about to rip the black piece out of the bag
Sent from my iPhone
hymanykd
06-05-2015, 01:18 AM
Mine was 20min with a hair dryer and then a set of plyers destroyed the fitting, kinda damage the the bag threads a little pvc cement works like a charm
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.