need amp suggestions

[togan9]

so it looks like my amp powering my towers speakers may have taken a crap on me during the winter so i need some replacement suggestions that wont break the bank. thanks

[mmandley]

so it looks like my amp powering my towers speakers may have taken a crap on me during the winter so i need some replacement suggestions that wont break the bank. thanks

What speakers are you running? if you are running 4 or more are you running them seperatly or combined to create a 2ohm load?

[Birdman]

I have the stock kicker 300.2 if your interested?


Sent from my iPhone using Tapatalk

[Birdman]

Out of my 13 obv that is


Sent from my iPhone using Tapatalk

[togan9]

what do you want for it? not sure the exact speakers it will push but i do know they are polk audio 6x9s in titan enclosures i think...

[Birdman]

I would like 150 Canadian plus shipping i only used it for a year


Sent from my iPhone using Tapatalk

[trayson]

how many tower speakers do you have?

If you want a decent "bang for your buck" amp, I've had good luck with my Precision Power P600.2 so far. It's a class D and it's really compact.

[Birdman]

How do you delete your own post in tapatalk

[togan9]

Just 2 speakers

[trayson]

This is the tower amp I run.
Precision Power P600.2 (http://www.onlinecarstereo.com/CarAudio/p_33875_Precision_Power_P6002.aspx?utm_source=goog le_shopping&utm_medium=Product_Feed&utm_campaign=google_shopping_Price_Comparison&gclid=CjwKEAjwpsGqBRCioKet--bp_QcSJADCtbsb0ci_G4yhMwE4AXSiC2NRBVtlw7bpSWMSt52D he3TyRoChRXw_wcB)


RMS Power Rating (14.4V):
4 ohms: 190 watts x 2 chan.
2 ohms: 300 watts x 2 chan.
Bridged, 4 ohms: 600 watts x 1 chan.

RMS Power Rating (12V):
4 ohms: 100 watts x 2 chan.
2 ohms: 200 watts x 2 chan.
Bridged, 4 ohms: 400 watts x 1 chan.

[xBabyJesus]

I picked up the Precision Power P900.4 for like $30 more than the 600.2 -- For that kind of money, it's good future proofing for tower upgrades. I'm thinking about swapping the stock amps all out for PPI gear, get rid of the Class AB stuff and run all Class D...

[trayson]

I picked up the Precision Power P900.4 for like $30 more than the 600.2 -- For that kind of money, it's good future proofing for tower upgrades. I'm thinking about swapping the stock amps all out for PPI gear, get rid of the Class AB stuff and run all Class D...

I've thought about doing the same thing. For my application, the 600.2 was a better fit. I needed to run my towers with two channels at a two ohm load. If I was running either 4 channels at 2 ohms or if I was running 2 channels at 4 ohms, I'm sure I would have likewise went with the p900.4

I've also thought about swapping my Kicker ZX700.5 that's running my subs and cabins. But it's doing fine so far, and I'm not sure I could come out flush on the swap, so it's money I don't *need* to spend right now...