PDA

View Full Version : Ballast pumps are not operating.


BamaMojo
05-09-2015, 08:01 AM
The pumps in my boat won't work at all. Worked fine Thursday , yesterday nothing. When I hit the switch the light comes on the switch but nothing at the pumps, no noise , nothing. Any help is appreciated as I don't want to spend 2 hrs manually pumping bags today.
Thanks in advance


2012 Mojo
mmandley
05-09-2015, 08:24 AM
Can't recall the exact location of the circuit breaker but that's what it sounds like to me. Also there is a false Panel in the Port side V drive locker. The pumps are physically located behind it.
wolfeman131
05-09-2015, 08:50 AM
That's what you get for sending me pics from the lake yesterday!



I think there is a second breaker that is on/near the port side locker panel. That sounds like the culprit.
BamaMojo
05-09-2015, 09:03 PM
That's what you get for sending me pics from the lake yesterday!



I think there is a second breaker that is on/near the port side locker panel. That sounds like the culprit.

Yes, this was it. Was excited when discovered, been out plowing since!
Thanks for all the help once again!


2012 Mojo