OZ HD Tower with Rev10s

[Gettin' It]

I just bought a new mojo and working with my stereo guy there doesn't seem to be a great location for the Rev10s. I wanted them in the front corners but they would be an inch above my head! Any members have pictures of where they put theirs? THANKS!

[mcdye]

Mine are in the corner, where they started putting the bracket on a '15 OZ. All hidden, no wire shows.

[Gettin' It]

Can you post a picture?

[mcdye]

With the '15 tower you can’t put them in the same corner, unless you build a bracket to fit the factory bracket. Then there would be no way to hide the wires with them mounted there. Move them in on the horizontal bar or on the vertical bar.

[Gettin' It]

Seems no matter where in that corner I put them it's an inch from my head when the seat riser is up!! No good! So currently I have them mounted about 2 inches out from the bimini front rod holes.

[jstenger]

Try the forward tube just above the upper rack crossbar.

[Gettin' It]

Basically in the corner of the forward bar? No good.

[jstenger]

Here is mine on an OZ HD without the gusset. I thought there was room between the gusset and the crossbar on yours.

http://images.tapatalk-cdn.com/15/04/16/248259b5b82d8d8cf8860ee2f49cc59c.jpg

[New Guy]

Here's mine. Make sure you run extra wire for a three some and leave enough room.
http://i368.photobucket.com/albums/oo121/2005r6rider/20140617_141331_zps91ebff6c.jpg

[Gettin' It]

There we go!!! Minus the 420 in the center do you hit your head on the standalone rev10s?

[New Guy]

Put it this way you will only do it once hard, maybe twice if you have a hard head.