LSV tower leg Diameter

[Rakkasan]

Mornin guys could someone tell me what diameter pipe is on the tower of the newer LSVs. I have a coworker who's wanting to put some lights on the tower and wanting to know what size mounts to buy. He has either at '13 or '14 LSV(I can't remember.)

Any help would be appreciated.

[mmandley]

On the 13 and 14 towers it depends if he has the Regular or the HD OZ tower.

[Rakkasan]

Ok. Thought there was only one kind for those years. Could you tell me the difference, I know his folds foward if that helps.

[mikenehrkorn]

Both the Oz and the Oz HD fold forward -- they look very much alike its just the HD has a larger diameter tube. I'm not sure how big the HD is, but the regular Oz has a 1 7/8" diameter.

[13mobiusLSV]

Both the Oz and the Oz HD fold forward -- they look very much alike its just the HD has a larger diameter tube. I'm not sure how big the HD is, but the regular Oz has a 1 7/8" diameter.

It's barely smaller than 1 7/8". A 1 7/8" clamp will not work going onto a bare tower.

[Rakkasan]

I didn't know it was so small. He told me he measured around the tube and said it was six inches around which led me to believe the diameter would be around 3". I took a caliper to my '08 tower and it's over 2 1/2(can't remember exactly.)

http://www.rigidindustries.com/mounting-options?page=1&f[0]=field_product_mounting_options%3a965

He looking for one of these mounts for a set of duallys.

[jstenger]

OZ HD is 2 3/8"
OZ tower holds 2 racks.
OZ HD holds 4 racks.

[mmandley]

Measure the outside diameter then divide by 3.14 to get the size.

[Rakkasan]

Measure the outside diameter then divide by 3.14 to get the size.

WHOO!! Breaking out the PI. Forgot all about that. Damn Whiskey

[kaneboats]

Somebody told me pi r squared. I said "No, they're round."