2014 Mondo Wakeplate not functioning

[Doublea]

All- I just dewinterized my Mondo and the wakeplate is not working. It isn't working automatically or manually. Anyone have any suggestions on what I can check.

Thanks in advance.

[mmandley]

Might have a fuse under the dash. After that's it's dealer tune or TSS of your up for that.

I would start at the piston and make sure it has power when commanded. Then track backwards

[SurfSon]

There is a relay switch, like the one under the battery switch, that's located on the port side of the engine compartment. You will need to remove the front engine access to check it. If it's not reset, the plate and ballast pumps will not operate. The switches will light up but, the pumps are not energized.


SurfSon
2014 Mondo

[Doublea]

There is a relay switch, like the one under the battery switch, that's located on the port side of the engine compartment. You will need to remove the front engine access to check it. If it's not reset, the plate and ballast pumps will not operate. The switches will light up but, the pumps are not energized.


SurfSon
2014 Mondo

Checked the relay and it is fine. I guess it may need a trip to the dealer