PDA

View Full Version : Exile gear just arrived!!



blackcup
04-10-2015, 11:47 PM
Got a SMOKING deal on this stuff from a local retailer. Decided it was too good to pass up and got all 4 speakers.

4 x SXT9Q
30.2 AMP
MKII Controller

Can't wait to hear this setup!!! :o :o :o

Thanks everyone for the info and advice!!

http://s24.postimg.org/z4lir9xa9/20150410_204256_1.jpg (http://postimg.org/image/z4lir9xa9/)

mmandley
04-10-2015, 11:55 PM
Awesome congratz

trayson
04-11-2015, 12:08 AM
Pretty sure that won't suck.

blackcup
04-11-2015, 12:12 AM
Any threads with tricks on how to fish the wire?

What do you guys recommend for wire? It already has 18 gauge (i think?) from the factory towers.

Going to eventually get a light bar as we get in a lot of night runs so would make sense to run the power for that at the same time?

viking
04-11-2015, 12:33 AM
If running new I'd run 12AWG through the tower so it can take just about whatever you want to put up there.
If already run with 14 or 16 AWG I'd probably just tie in and couple the line. If it truly is 18awg, I'd tether it with 12
AWG and pull a new line all the way through.
For LED they only need 20 or 22AWG so not biggie there especially if already wired. Tie that in with the 12AWG and your golden. If you use 4-conductor that would cover 2 sets pretty easy on LED and 4 conductor 12AWG is easy to fish and take care of the speakers.

viking
04-11-2015, 12:41 AM
I'm assuming you already have wire in tower. Hook on and pull through!

If NOT ............. use a small piece of plastic tied to end of line and use a vacuum to suck it through through the tower. Worked like a charm for me!!

Good lucK!

uniwarking
04-11-2015, 09:39 AM
Enjoy the project and the end result! Awesome gear :)

blackcup
04-11-2015, 01:20 PM
great thanks for the info. gonna get started on it this wknd.

FYI - any of you guys that are close to the border ... with the shitty Canadian dollar I ended up paying $1475.00US for this package. Not sure what kind of taxes etc you pay coming across but that's about $1000 off.

blackcup
04-11-2015, 01:23 PM
If running new I'd run 12AWG through the tower so it can take just about whatever you want to put up there.
If already run with 14 or 16 AWG I'd probably just tie in and couple the line. If it truly is 18awg, I'd tether it with 12
AWG and pull a new line all the way through.
For LED they only need 20 or 22AWG so not biggie there especially if already wired. Tie that in with the 12AWG and your golden. If you use 4-conductor that would cover 2 sets pretty easy on LED and 4 conductor 12AWG is easy to fish and take care of the speakers.

Decided not to bother with the LEDs ... from what i have read its not that easy of a project with the Exile's. I am just going to do a light bar up top and call it a day.

kaneboats
04-13-2015, 09:49 AM
Congrats on your Exile setup. I'm sure you will love it. Be sure to share some pix when you get them on the tower.

N2OGTO
04-13-2015, 12:39 PM
I used weedeater string to fish my wires through the tower, worked great. If you already have wire in ther i'd use them for pulling new heavier gauge wire through.

rdlangston13
04-18-2015, 10:20 PM
Thread hijack! My exile BT4 just arrived! I am going wireless! http://i1130.photobucket.com/albums/m523/rdlangston13/0A798E2D-5F2A-4D66-BC52-94CFC7F67643_zpsogvfppwl.jpg (http://s1130.photobucket.com/user/rdlangston13/media/0A798E2D-5F2A-4D66-BC52-94CFC7F67643_zpsogvfppwl.jpg.html)


Sent from my iPhone