Engine Divider Panels!

[BrettLee3232]

Installed my panels today...a must have for any upgraded ballast in the rears.

http://i3.photobucket.com/albums/y81/brettlee3232/Mobile%20Uploads/54CAF22E-0B29-4E6E-84D8-F17D0D5821C3.jpg (http://s3.photobucket.com/user/brettlee3232/media/Mobile%20Uploads/54CAF22E-0B29-4E6E-84D8-F17D0D5821C3.jpg.html)

http://i3.photobucket.com/albums/y81/brettlee3232/Mobile%20Uploads/4A0C252B-3D64-431E-9614-7EF6F21601F4.jpg (http://s3.photobucket.com/user/brettlee3232/media/Mobile%20Uploads/4A0C252B-3D64-431E-9614-7EF6F21601F4.jpg.html)

They fit perfect and were easy to install. Well worth $60

[moombadaze]

Good looking mod

[trayson]

I've thought about these, but it's hard enough on my 4 decade old knees crawling around on the HDPE when I've got them folded down and I'm doing stuff like oil changes or winterization. I think it'd be even more uncomfortable with the metal braces there, crawling on those...

[BrettLee3232]

I've thought about these, but it's hard enough on my 4 decade old knees crawling around on the HDPE when I've got them folded down and I'm doing stuff like oil changes or winterization. I think it'd be even more uncomfortable with the metal braces there, crawling on those...

You can't take yours out? On my mondo they just pull right out

[mmandley]

You can't take yours out? On my mondo they just pull right out

No in the older boats they are screwed into the floor.

The difference also is in the older boats the panels aren't as tall, so they open and fold flat on the floor.

[Gabbyg88]

How long? I want to buy and install on an 07 OBV.

[Gabbyg88]

I just found them on wakemakers - 19" long

[BrettLee3232]

No in the older boats they are screwed into the floor.

The difference also is in the older boats the panels aren't as tall, so they open and fold flat on the floor.

Gotcha!


I just found them on wakemakers - 19" long

Does yours pull out?

[Gabbyg88]

Mine are screwed in.

http://images.tapatalk-cdn.com/15/04/11/9c00ce1345c7b88984adc5d1ba7bb7ac.jpg

[snyderaaron]

I unscrewed mine to put them in, just be careful that you install them so the panels will fit back in. I didn't first time


Sent from my iPhone using Tapatalk

[Gabbyg88]

I unscrewed mine to put them in, just be careful that you install them so the panels will fit back in. I didn't first time


Sent from my iPhone using Tapatalk
Thanks, I was thinking about that after I took the picture today. I am going to slide them down where they fit and mark the location before I pull the panels out.

[spyder]

I'm at a loss as to what this mod did? just reinforce the panels for the weight of the bags against them?

[mark540]

The newer panels are like 1/2" or so starboard material and are taller vs some of the older boats, when you put bigger bags in the locker the weight of the bulging bag bows the door, the weight will eventually cause the door to cave and touch the motor. The material is just too flexible to hold, these aluminum pieces add strength and stop the panel from bowing.

[spyder]

The newer panels are like 1/2" or so starboard material and are taller vs some of the older boats, when you put bigger bags in the locker the weight of the bulging bag bows the door, the weight will eventually cause the door to cave and touch the motor. The material is just too flexible to hold, these aluminum pieces add strength and stop the panel from bowing.

Thanks. That's what I figured.

[BrettLee3232]

http://images.tapatalk-cdn.com/15/04/20/537b646ec78426ca90e5d009997f1995.jpghttp://images.tapatalk-cdn.com/15/04/20/63470aa9519b4856cd964578788d5c39.jpg

No bow at all now with the panels


Sent from my iPhone using Tapatalk

[mmandley]

This is exactly why I got mine. I just haven't installed this year yet. Actually non of my winter mods have been done yet..

Gaw,

New Bluetooth
New Amps
New Speakers
New Mirror
New Gunnel Pads
New Divider Braces
New Cargo Nets
New Flag Pole

[spyder]

New Flag Pole

anywhere to get a tower mounted flag pole?

[sivs1]

anywhere to get a tower mounted flag pole?


Like these?

http://www.ebay.com/sch/sis.html?_nkw=Wakeboard-Tower-Flag-Holder-

[spyder]

Like these?

http://www.ebay.com/sch/sis.html?_nkw=Wakeboard-Tower-Flag-Holder-

neat...

http://www.ebay.com/itm/Krypt-Wakeboard-Tower-Water-Sports-Flag-Holder-Mount-/331179120218

Thanks.. i'll look into it.. Canadian dollar sucks right now against USD though.

[mmandley]

I use one almost like that. I also just used a wood pole last year. It got a bit of mildewed last year dueing some rainy weeks when the oat was outside. I figure its time for an upgrade to version 2.0

Merica.

This was last 4th of July.
I bought all the guys American Flag Pong shirts
People where calling me Merica Mike.

http://i639.photobucket.com/albums/uu114/mmandley/LBC%207-4-14/GOPR0020_zps10bdf1d3.jpg (http://s639.photobucket.com/user/mmandley/media/LBC%207-4-14/GOPR0020_zps10bdf1d3.jpg.html)

Hard to see but I got my fake Mullet too.

http://i639.photobucket.com/albums/uu114/mmandley/LBC%207-4-14/IMAG0267_zpsacb08309.jpg (http://s639.photobucket.com/user/mmandley/media/LBC%207-4-14/IMAG0267_zpsacb08309.jpg.html)

[kaneboats]

We salute you my brother. Great job!