2013 Mojo mirror upgrade

[bwoodwo6896]

Does anyone have suggestions for a tower mounted mirror? I have the standard windshield mounted one but it always falls. I have tighted it and it stays for a little bit but goes back to falling. Suggestions? Thanks


Sent from my iPhone using Tapatalk

[wolfeman131]

Get the Samson one from Bakes.

[mcdye]

For your tower about the only option is the Samson Arch arm (https://samsonsports.com/shop/reverse-arch-tower-mirror/)

I have had this setup on 2 boats and would do it again CIPA Deluxe bracket and 180 mirror (http://cipa.lucidbusiness.com/product/cipa-01609-premium-mirror-with-deluxe-mounting-bracket/)

[viking]

Another vote for Samson. They are beefy and very sturdy. Can also get them powder coat to match tower


Sent from my iPad using Tapatalk HD

[mmandley]

I have had this setup on 2 boats and would do it again CIPA Deluxe bracket and 180 mirror (http://cipa.lucidbusiness.com/product/cipa-01609-premium-mirror-with-deluxe-mounting-bracket/)

Just got this for the Mojo for this season. Hoping all the hype is worth it.

I had the Sampson mirror on my LSV with the arm that came off the side of the tower, it was sweet. Sampson has quality gear but its pricey.

[uniwarking]

The upgraded mirror from Moomba is really nice as well, I've been happy with it.

[tarheelskier]

Another vote for the Samson. Took a little getting used to last season, because it is so much higher than the windshield, but love it now.

[BrettLee3232]

Anybody powder coating these?

I was thinking either black to match my tower or Brittany Blue to match my cans. Not sure what would look the best.

[trayson]

For your tower about the only option is the Samson Arch arm (https://samsonsports.com/shop/reverse-arch-tower-mirror/)

I have had this setup on 2 boats and would do it again CIPA Deluxe bracket and 180 mirror (http://cipa.lucidbusiness.com/product/cipa-01609-premium-mirror-with-deluxe-mounting-bracket/)

The Cipa vision 180 is a fantastic mirror, especially for the money.

[muehlcj]

Anybody powder coating these?

I was thinking either black to match my tower or Brittany Blue to match my cans. Not sure what would look the best.

The Samson comes with black as a color option. Get black if you want blue then plasti-dip blue. If you get sick of blue peel off and go back to black.

[bwoodwo6896]

Thank you for the suggestions. It looks lime the Samson is way to go.


Sent from my iPhone using Tapatalk

[BamaMojo]

http://tapatalk.imageshack.com/v2/15/04/03/d47746985014794bfe58d4ec014ef0da.jpg
Love mine!


2012 Mojo

[viking]

I bought mine in white powder to match tower
21712

Sent from my SAMSUNG-SM-G870A using Tapatalk

[BrettLee3232]

I bought mine in white powder to match tower
21712

Sent from my SAMSUNG-SM-G870A using Tapatalk

Looks really good in white!

[ian ashton]

I must be in the minority that had a Sampson and hated it - for the OBV (and my taste) it was not long enough - the mirror is easily 18" above the windshield, which for me is too high - I like to sit while I drive and glance at the mirror, that high requires the WallyStand or a full head move.

[mikenehrkorn]

I must be in the minority that had a Sampson and hated it - for the OBV (and my taste) it was not long enough - the mirror is easily 18" above the windshield, which for me is too high - I like to sit while I drive and glance at the mirror, that high requires the WallyStand or a full head move.

I'm with you Ian...I didn't care for the length either and would have preferred it being about 6-8" longer. If I recall correctly, Jeff (tarheelskier) bought the arm from me which was originally yours, so at least someone likes it and is putting it to good use!! :)

[Gettin' It]

I've been looking at buying this mirror and the dealer has been going on and on about how it vibrates when riding down the lake and how much I'll hate it. Can you guys all be wrong and them be right??? Doubtful

[BamaMojo]

I've been looking at buying this mirror and the dealer has been going on and on about how it vibrates when riding down the lake and how much I'll hate it. Can you guys all be wrong and them be right??? Doubtful

When running on rough water it can vibrate a bit. I use this when pulling rider , it works great as a driver mirror. I thoroughly enjoy mine!


Sent from my iPhone using Tapatalk

[jmvotto]

With the Oz tower it sits high, my v2 it sits perfect about 8 to 10 inches above the windshield

Love it except my 4 xm9 get in the rear view

[trayson]

I was out on the water last night and it was rough as hell. we could only do maybe 10 to 15mph on the way out and the Columbia River might as well have been the Columbia Ocean for us... The mirror was great. No complaints.

[gregski]

I have the Monster tower arm and CIPA bracket, with the CIPA 180 mirror. I like the 180 mirror. The Monster bracket holds tight. I haven't found the right placement yet; right now it's a bit too low to the windshield but if I go a little higher, it gets into the tower hinge, so I have to go a lot higher. There's probably a different angle that would work better but overall, I'm happy with it.

[Alerberg]

I know I am late to this thread but wanted to let you know I purchased the CIPA COMP II mirror for $37 on amazon and LOVE IT! It is smaller (which I like) it has rubber pads for mounting on the windshield (doesn't scratch) and was very easy to use. Plus, it has a smooth top so it doesn't rub/rip my boat cover. Did I say I LOVE this mirror... I thought the smaller size might be an issue, it was not... in fact, it gave me more forward visibility.

Here is the link to the mirror: https://www.amazon.com/gp/product/B00MFQBXO4/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Good luck! 2015 Moomba Mondo w/ autoflow 2.0