2000 Moomba Outback Mod Thread

[MoombaPat]

Hey guys! Just wanted to keep a running thread of the modifications I am doing to my 2000 Moomba Outback. Appreciate any input or advice as this will be a long coming project. I am currently deployed but will be back shortly so some of the purchases I will show I haven't even seen or started yet. Come April it will be in full swing and you will see some head way on it!

This first picture is the day I bought the boat. As you can see it had some CRAZY oxidation and a trailer that was on its last leg.

BEFORE:
21491

AFTER WITH NEW TRAILER:
As you can see I did some work and tried to clean up the Gel Coat. I did a few passes with a buffer and Rubbing Compound. Once I did that I came back through and gave it 2 coats of wax. Still didn't get it to where I wanted it though.
21493

After dealing with a hard decision on the route I wanted to take to fix the oxidation on the boat I decided that I would remove all my vinyls, wet sand, rubbing compound and wax/polish the boat. Get her back to her glory days. I started with 600 Grit one time through on the hull, followed by 1800 two times, and the 2600 two times. This process alone took me about 30 hours. It was extremely rough but the results were outstanding and it kept me going. Once I finished that up I went through with a rotary polisher and did the entire hull with Heavy Oxidation remover rubbing compound. Once I finished that up a went through and hand waxed and polished the hull two more times. As you can see this is one heck of a process but the results below speak for them selves.

21495

21497

This was a major undertaking. Lessons learned; buy a ton of sand paper. You will gunk the wet sand paper up in a matter of minutes. Get a sanding block, this will allow you to have an even pressure all the way through. spray off the area as soon as your done with it, it will give you immediate feed back on your results which will help you keep going. last but not least, bring a friend. this was absolutely exhausting!

[Badfoot]

She looks beautiful. Hours spent was well worth it. Look forward to seeing the updates this spring.

[MoombaPat]

So once I got the exterior squared away, I wanted to start working on the sound system. It was a pretty big mess, and I don't have the money to spend on Exile, or other top end systems out there. So I was working with what I had, and it turned out pretty good.

BEFORE AMPS/BATTERIES
21498

AFTER AMPS/BATTERIES
21499

NEW SUB
21500

I didn't have the chance to really finish this up, and it was a learning process for me since I had very little experience in audio systems. I have done a bit of research since I have been gone and will get back in there and finish it up once I get home. I am going to swap out all the speakers with the 6" Kickers w/ LED lights, Replace the tower speakers with kickers, and install the Exile Equalizer.

Something else that I added, since I was planning to add new cabin lighting and the exile speaker LEDS was a new switch panel to control all the additional lighting I will be installing. These are hooked up to the two distribution panels you see below the amps, so I can route all my future lighting project to them and control it from the switch panel. I just used my Craftsman Multi Tool and cut out a section through the fiberglass, wired it into the batteries, with an on of switch.

21501

[MoombaPat]

So as I continued to make my way through the boat I had some old nasty Hydro Turf in the bow walk way. The previous owner did a horrible job on it so I wanted to pull it out.

21502

21503

[MoombaPat]

Some of the things I have already purchased while I have been gone and will be working on are listed below;

New Manifolds
News Risers
New Hardware
New Gaskets
It was pricey, but the old ones were shot and totally rusted out. The total was right around 917.00 after shipping and taxes.
http://www.marineexhaustmanifolds.com/indmar-marine-engines-and-parts.htm

New Moomba CHROMAX decals for the sides, now that the boat is all cleaned up and ready for new decals.
Again, very pricey for these as well but it will look sick. 209.00 per side
http://www.waterskis.com/110150-p/moomba_chrome_decal_large.htm

New Registration Numbers to match the Moomba Chroma
Not too bad on the price I believe after shipping it was 69.00 for a full set.
http://shop.domednumbers.com/products/moomba-registration

I also replaced the fuel pump, and it went out right before I left. Ran me right around 145.00 after shipping and taxes.
http://www.skidim.com/prodinfo.asp?number=RA080018

I will get pictures of all this mid April once I get back to it, and try and get all these projects done before boating season officially kicks off!

If anyone has any questions on anything I have done or recommendations please let me know! I appreciate any input!

[liquid_acid]

Those decals are going to look great. Great job bring her back. She looks awesome.

[MoombaPat]

Those decals are going to look great. Great job bring her back. She looks awesome.

Thanks man! I appreciate it! Really excited to get back and get to work.

[MoombaPat]

Those decals are going to look great. Great job bring her back. She looks awesome.

Thanks man! I appreciate it! Really excited to get back and get to work.

[moombadaze]

looking good, keep at it

[MoombaPat]

After talking with liquid_acid about the perfect pass system and install I think I am going to go ahead and bite the bullet and get the Perfect Pass Stargazer Wake Edition S

http://perfectpass.com/?q=systems

Looking at about 1,200.00 for it but it seems like it will really be worth it!

[MoombaPat]

SO after doing some research I pick up a new 3 Blade Acme Prop.
http://www.wakemakers.com/acme-543-propeller.html
21636

I also picked up the replacement hardware kit. So after shipping it was right around $415.00.

I talked with a few companies to find out that my 1:1 drivetrain ratio make for more effective use out of a 3 blade than the 4 blade. So I am pulling off my 4 blade Acme Prop, getting it resurfaced, and will have it as my spare prop.

[trayson]

After talking with liquid_acid about the perfect pass system and install I think I am going to go ahead and bite the bullet and get the Perfect Pass Stargazer Wake Edition S

http://perfectpass.com/?q=systems

Looking at about 1,200.00 for it but it seems like it will really be worth it!

Personally, I think that the stargazer GPS edition is overrated. I ride on a river with current and the GPS is worse as you have to set it for one speed if you're going upstream and change it if you turn and go downstream. Plus the GPS is more expensive than the Wakeboard Pro paddlewheel edition.

If I didn't have anything on my boat, I'd save some money and get this:
http://www.hydrophase.com/classic

http://www.hydrophase.com/sites/all/themes/ridesteady/images/v_1_0/hydrophase_ridesteady_kit.jpg


I agree, I LOVE having speed control on my boat. and I happen to have the PP wakeboard pro. But paying extra for the GPS really only saves you some time/hassle on the install.

[liquid_acid]

Personally, I think that the stargazer GPS edition is overrated. I ride on a river with current and the GPS is worse as you have to set it for one speed if you're going upstream and change it if you turn and go downstream. Plus the GPS is more expensive than the Wakeboard Pro paddlewheel edition.

Guess I forgot to mention that aspect of the gps. I ride on a lake with little to no current so I am not affected by this. Good call. I do love my PP stargazer wake edition though. I can finally ride at a consistent speed. It seemed I was getting pulled at either 16 or 33mph.

[MoombaPat]

I have the occasional current where I'm at but nothing substantial. But I am also moving up to VA, and not sure exactly where I will be riding at. I'm torn at this point. As you know, having that speed control is essential, just a hard point decision right now. I also look at the resale on this one a little bit. Seems like having the name, "Perfect Pass" would go a little farther when ever I decide to part with the old girl and go for a newer Moomba! If I'm off base on that feel free to let me know.

As always, I really appreciate the input. Keep it coming guys, all it can do is make my boat better!

[moombahighrider]

I also look at the resale on this one a little bit. Seems like having the name, "Perfect Pass" would go a little farther when ever I decide to part with the old girl and go for a newer Moomba! If I'm off base on that feel free to let me know.

As always, I really appreciate the input. Keep it coming guys, all it can do is make my boat better!

I agree with this comment 100%. I would not look at a boat that did not have perfect pass.

[MoombaPat]

http://images.tapatalk-cdn.com/15/04/19/9c089d522a912cbcba4234982c694a57.jpg

Putting the old lady to work. Removed the old hydro turf, sanding down the old gel coat, getting ready for new paint and turf!


Sent from my iPhone using Tapatalk

[liquid_acid]

Haha. That's great.
You get that perfect pass in?
Post pics of the finished platform when you are completed.

[MoombaPat]

I ordered it the other day, haven't had the chance to install yet. Having a nightmare getting the manifolds off. Have to take it in and have it air chiseled off... As usual, boat projects are the farthest from smooth!


Sent from my iPhone using Tapatalk

[liquid_acid]

Ya when you're working on an older boat, more problems always seem to come up. A quick project always seems to turn into all evening and a lot more beer.

[MoombaPat]

Yeah, day in and day out! Lots of beer!


Sent from my iPhone using Tapatalk

[MoombaPat]

So I decided that I wanted to try out Plasti Dip on the platform. I got the first layer of primer down. Looking to do 3 coats color, 2 coats clear. See how she turns out soon!


Sent from my iPhone using Tapatalk

[MoombaPat]

http://images.tapatalk-cdn.com/15/04/21/29b42fbe8c0fb2d841307de81f97c06a.jpg

Making slow progress using the Plasti Dip, few more coats to even it up and it will get clear coated then hung on the boat.


Sent from my iPhone using Tapatalk

[MoombaPat]

http://images.tapatalk-cdn.com/15/04/21/d3813eda488ed293a88fce2eec9bc1d0.jpg

http://images.tapatalk-cdn.com/15/04/21/3395c8a63280f719b71c90ce83f6e387.jpg

Turned out pretty good, and has a good texture to it. I planned on hydro turfing the platform but I don't think I need to anymore.

Anyone who wants to do this, buy several cans more than you think you need. I used 1 can of white to prime the surface, 4 cans of blue, and 1 can of clear. I honestly could have used another can of blue to even it out more and another can of clear. Not hard to use, goes on just like spray paint.

I'll keep you guys posted on how it holds up on the water, high traffic, sun, etc.




Sent from my iPhone using Tapatalk

[kaneboats]

This is really interesting because the stuff is able to be picked off when you get tired of it. Most of us would not have tried it for this application. So, we are interested in hearing your thoughts. I doubt many of us will transform our factory platforms. But, as folks construct their own surf platforms in various shapes, this might be something that is extremely helpful. So, thanks for taking the time to share your efforts and results.

[MoombaPat]

Have to send the boat in for some heavy hitting. Tried everything under the sun to get the manifolds off and just don't have the tools for it. Dropping it off tomorrow to have it air chiseled off. Once that's done I'll throw on the new manifolds and risers.


Sent from my iPhone using Tapatalk

[kaneboats]

I hope they are careful. There was a guy on here once upon a time who took his somewhere and they tried an air chisel to get his stuck oil filter off. Ended up cracking the block on a motor with less than 25 hrs. on it. Gotta be careful with those specialty tools.

[bergermaister]

Blue??? I must have missed something.

[kaneboats]

Come on man, everyone wants to look like the Death Star. You should be next.

[MoombaPat]

Yeah, I'm mixing things up a bit. Redoing the whole interior with grey and blue. Don't like doing the typical, wanted to mix it up!


Sent from my iPhone using Tapatalk

[MoombaPat]

http://images.tapatalk-cdn.com/15/04/27/75036ed0a40aca469b3da97ee69fdbc2.jpg

Painted my new Manifolds and Risers while waiting to get my boat back from the shop. I'll have it back later tonight or tomorrow. Hopefully get everything hooked back up the same day and test it all out!


Sent from my iPhone using Tapatalk

[spyder]

like the plasti-dip idea.. i would of went black though, as the hull colour and platform aren't the same blue.

[MoombaPat]

I know what your saying, it's intentional though. When you see the finished product maybe I'll change your mind! But as always to each their own, I like it!


Sent from my iPhone using Tapatalk

[parrothd]

So won't the plastic dip flake off?

[MoombaPat]

We will see how it holds up, not too concerned. It was an idea that I wanted to try, if it works out great. If not then I can just strip it off, repaint, and hydro turf like I originally planned.


Sent from my iPhone using Tapatalk

[MoombaPat]

Bad news... Have to replace the heads. They were in just as bad of shape as the manifolds. Easy swap out turned into a 3,000 dollar maintenance/repair...


Sent from my iPhone using Tapatalk

[mmandley]

So won't the plastic dip flake off?

This will be interesting to see in the long term.

I had the Moomba plasti-Dipped and it nver peeled from the water, but it wasn't put under the same pressure the platform is.

Now I can say I plasti-Dipped the Mojo 2.5 and Moomba on the rear sections, thats pretty much permanent at this time. Every time I tried to remove it the leters wanted to peel off. So I just left it now lol.

[MoombaPat]

Once I get the engine squared away, I'll be able to put her to the test. Going to be a few weeks before I'm able to get on the water.


Sent from my iPhone using Tapatalk

[MoombaPat]

After pulling the heads I discovered a lot of damage in the block to include a nice big crack in the piston wall. Time for a new engine... Going to be a little bit before I can update everyone on all the other projects!


Sent from my iPhone using Tapatalk

[liquid_acid]

Sorry to hear that man. Awful news. Best of luck.

[MoombaPat]

All good, not too happy about it but I'll be back on the water in a few weeks. Working on removing the carpet from my engine cover, cleaning it up, and painting it to match the new color scheme. I'll post pictures on the projects I'm working on later!


Sent from my iPhone using Tapatalk

[MoombaPat]

Peeled off the old Hydro Turf, removed the carpet, and sanded everything down so far. Still need to patch damaged sections and the screw holes from the carpet molding. Once I finish that I'll start the painting process.

http://images.tapatalk-cdn.com/15/05/05/71282076a48278b8580a8cac4b413c18.jpg


Sent from my iPhone using Tapatalk

[MoombaPat]

Got the first coat of grey on, next will be doing the bottom with blue and throwing the cushions on.

http://images.tapatalk-cdn.com/15/05/08/b3b017e748d5c37aa878055eed885f71.jpg
http://images.tapatalk-cdn.com/15/05/08/787a2fe747bbd7cfaa8d0b957f47285b.jpg


Sent from my iPhone using Tapatalk

[kaneboats]

Looking good! Keep up the solid effort and keep us in the loop.

[wolfeman131]

Shame you messed up the yard tools. Now, every time you use them, you will be thinking of the boat and being on the lake. Self-inflicted torture.

[MoombaPat]

Hahahaha, valid point!


Sent from my iPhone using Tapatalk

[MoombaPat]

Continuing my progress on the engine cover. Once everything is dry I will clean it up and clear coat it. Then add all my hardware and seat cushions back on and I'm done!

http://images.tapatalk-cdn.com/15/05/09/42889e2ca0eab0680d78b4371aab9584.jpg
http://images.tapatalk-cdn.com/15/05/09/eeb5087ff78895e10434653b1d5737b0.jpg


Sent from my iPhone using Tapatalk

[MoombaPat]

Very happy with the final product, can't wait to get it in the boat!

http://images.tapatalk-cdn.com/15/05/09/5db8fc0552ea745bb4268c6ede04e263.jpg

http://images.tapatalk-cdn.com/15/05/09/0e346c9f6065a934b2a81aeba1003509.jpg


Sent from my iPhone using Tapatalk

[spyder]

Damn that looks nice.

[MoombaPat]

Thanks! Quite a bit of work and patience but the results were well worth it.


Sent from my iPhone using Tapatalk

[viking]

Looks outstanding. Did you use paint or plasti-dip? Either way it turned out GREAT!

[MoombaPat]

I used paint, Plasti Dip doesn't come out nearly as smooth as paint. I would only suggest Plasti dip of small surface areas or areas you want to have some traction and aren't concerned about 100% even coverage.


Sent from my iPhone using Tapatalk

[spyder]

I used paint, Plasti Dip doesn't come out nearly as smooth as paint. I would only suggest Plasti dip of small surface areas or areas you want to have some traction and aren't concerned about 100% even coverage.


Sent from my iPhone using Tapatalk

Plus you'd want this to be permanent.

[MoombaPat]

Yeah, very true.


Sent from my iPhone using Tapatalk

[kaneboats]

Wow! That thing really pops! Love it.

[spyder]

Do you have the before?

[MoombaPat]

I have it on my computer, I'll post it up tonight.


Sent from my iPhone using Tapatalk

[MoombaPat]

The big difference was it was an off white color, and where the blue is now was carpet that was wrapped all the way around it.


Sent from my iPhone using Tapatalk

[MoombaPat]

Here is the only before picture I have
http://images.tapatalk-cdn.com/15/05/10/cde45be5ccb0b5f186819dfff3dc2afa.jpg


Sent from my iPhone using Tapatalk

[MoombaPat]

Here is the completely finished product with clear coat and all accessories bolted on.

http://images.tapatalk-cdn.com/15/05/15/d1644180c3995c19926c0c49ef723d3e.jpg


Sent from my iPhone using Tapatalk

[viking]

MUCH better!

[Rakkasan]

^^^^^What he said. Looks Great!!!^^^^^

[MoombaPat]

Thanks! I'm really happy with it. I think my next project will be working on some reupholstery!


Sent from my iPhone using Tapatalk

[Jordy Dag]

Have you found a new engine? Any HP mods in mind for the new stove?

[MoombaPat]

Hey, I have found an engine. As much as I wanted to put an Indmar back in I just didn't have the money to afford one. I got my hands on a 5.7 350 Mercruiser. Still comes with a lot of power and a very reliable engine with an abundance of parts. I don't have an plans to boost the power right away. Broke the bank because of all these issues!


Sent from my iPhone using Tapatalk

[Lynn Syndrom]

Great job with your restoration project. We have a 2003 and just love the hell out it. Really like to see these threads that show that the old boats can be a great option vs the mortgage on a new one.

[MoombaPat]

The engine is finally getting put in, hoping to have it back by the weekend so I can keep the progress moving!


Sent from my iPhone using Tapatalk

[MoombaPat]

Looks like I should have the boat back tomorrow, no guarantees but I have my fingers crossed. I'll take pictures of the new engine as soon as I get her back!


Sent from my iPhone using Tapatalk

[MoombaPat]

Problems Continued... So the engine is in and running however, the oil cooler was shut and causing the oil and water to mix... So I have ordered a new oil cooler and will have that done next week. Also my alternator decided to start shooting out fluctuating current so I am just going to go ahead and replace that as well as my oil pressure gauge which isn't reading correctly after switching out the sending unit.

So that being said, hopefully I'll have her back by this coming Friday and start updating you guys again.


Sent from my iPhone using Tapatalk

[MoombaPat]

Figured I'd throw a picture up of my new Tow Vehicle. Headed to pick up the boat tomorrow afternoon!

22407


Sent from my iPhone using Tapatalk

[MoombaPat]

Finally got the boat back, already slapped on the Chromax Decals and Registration numbers and working on fixing the audio!

22419

22420


Sent from my iPhone using Tapatalk

[MoombaPat]

New Transom Straps
2255222553


Sent from my iPhone using Tapatalk

[MoombaPat]

22554
2255522556

Getting her all waxed up, and have a new Fulton 1.5K two wheel Jack.


Sent from my iPhone using Tapatalk

[MoombaPat]

Redoing some of the upholstery!
2257522576
22577

Happy with the results, not a pro by any means but I will do all seats for about $65.


Sent from my iPhone using Tapatalk

[Lynn Syndrom]

Great job keeping the 2000 Outback on the water. I love the simplicity of the DD's and really like to see the older boats in use.

[MoombaPat]

I appreciate it, a lot of hard work and money. I'll probably be parting with it in the next year or two once I make my way to VA. But hopefully the next owner will appreciate all of the hard work I have put into it.


Sent from my iPhone using Tapatalk

[MoombaPat]

Got the bow cushions done today!
22595


Sent from my iPhone using Tapatalk

[MoombaPat]

Got my new speakers in, Rockford Fosgates 6.5s all around
22614


Sent from my iPhone using Tapatalk