trayson
02-19-2015, 01:29 AM
So, I have the 1180 gravity games bag. And I'm also upgrading my ballast system.
The gravity bag has 3 ports. One end has a port on the bottom rear and another port on the top rear.
The other end has a port that's at the front, and could be oriented to be at either the bottom or top.
So, my inclination would be to have the bag setup as follows:
Lower stern port = drain
Upper Stern Port = Fill
Upper bow port = Vent
Another option might be as follows, but it would needlessly lengthen the fill hose length and add head pressure:
Lower stern port = drain
Upper or lower bow port = fill
upper stern port = vent
Any thoughts on this?
The gravity bag has 3 ports. One end has a port on the bottom rear and another port on the top rear.
The other end has a port that's at the front, and could be oriented to be at either the bottom or top.
So, my inclination would be to have the bag setup as follows:
Lower stern port = drain
Upper Stern Port = Fill
Upper bow port = Vent
Another option might be as follows, but it would needlessly lengthen the fill hose length and add head pressure:
Lower stern port = drain
Upper or lower bow port = fill
upper stern port = vent
Any thoughts on this?