PDA

View Full Version : Replacing ACC switch?


BrettLee3232
02-09-2015, 02:07 AM
My Mondo has 4 ACC switches that I would like to take out & replace the with the Kicker zone control knobs. I'm not sure how big the kicker knobs are or if they could even fit?

Also is there a place that I can order a custom plate for that so it doesn't say ACC?

Thanks!
brain_rinse
02-12-2015, 11:11 PM
A picture would help. Sounds like a fun project.
BrettLee3232
02-13-2015, 01:46 AM
A picture would help. Sounds like a fun project.
Here's s pic of the switches
jstenger
02-13-2015, 06:16 AM
Why would you remove your ballast switches?
BrettLee3232
02-13-2015, 10:59 AM
Why would you remove your ballast switches?

LOL, I'm not. That's a stock pic from online. I have 4 ACC switches that aren't doing anything. I want to remove the switches and put volume controls for each zone. I also want to label it like everything else there.
jmvotto
02-13-2015, 11:04 AM
4 blank switched seams like a lot. I would mount the zone control knobs just slightly under the dash like an eq. I add a pac lc1 knob to create a third zone with the bow speakers.

from my 2007 under the wheel, my 2012 has it under the switch bank.


https://forum.moomba.com/attachment.php?attachmentid=11379&d=1306343089
BrettLee3232
02-13-2015, 11:28 AM
I'm a tall guy and don't want to rub my knees on it. I might have to put them somewhere else but I thought it would be cool to have them custom fitted with the switches.
MLA
02-13-2015, 11:29 AM
Out of their plastic enclosures, the zone controllers are roughly 1 x 2 x 5/8 thick.

http://i181.photobucket.com/albums/x101/chpthril/chpthril113/P2120014_zps8cc133b8.jpg (http://s181.photobucket.com/user/chpthril/media/chpthril113/P2120014_zps8cc133b8.jpg.html)
BrettLee3232
02-13-2015, 11:36 AM
Out of their plastic enclosures, the zone controllers are roughly 1 x 2 x 5/8 thick.

http://i181.photobucket.com/albums/x101/chpthril/chpthril113/P2120014_zps8cc133b8.jpg (http://s181.photobucket.com/user/chpthril/media/chpthril113/P2120014_zps8cc133b8.jpg.html)

WOW, thanks Mike! Hopefully I can make it out to the lake on Sunday so I can take some pictures and take some measurements.

Now I just need to find out how to get them engraved or find a place that sells them.