supervol0509
11-09-2014, 10:30 AM
I'm winterizing for the first time, and had a few questions:
My engine block has a knock sensor on the port side. I removed the starboard engine block drain plug, and drained the water out. Is there any real reason to drain from the port side, as well?
Is there anything wrong with reconnecting all of the hoses once all of the water has drained out? I don't see the point in leaving everything disconnected.
I need to know how to clean the flame arrestor. Owner's manual says to use "solvent", but I don't know what that refers to.
What about spark plugs? I was going to spray fogging oil in each spark plug bay/port/whatever, but don't easily see how they are removed.
My engine block has a knock sensor on the port side. I removed the starboard engine block drain plug, and drained the water out. Is there any real reason to drain from the port side, as well?
Is there anything wrong with reconnecting all of the hoses once all of the water has drained out? I don't see the point in leaving everything disconnected.
I need to know how to clean the flame arrestor. Owner's manual says to use "solvent", but I don't know what that refers to.
What about spark plugs? I was going to spray fogging oil in each spark plug bay/port/whatever, but don't easily see how they are removed.