PDA

View Full Version : replacement racks for LSV that can hold surfboards?



spyder
08-26-2014, 10:02 AM
Anyone have a line on good priced replacement racks for an LSV that can hold surfboards? does anyone make any racks that could replace the OEM ones for location of mounts? mine are getting beat up on the rubber and rope from the sun.

I have a red woody and a triple xxx.. would like to get them up out of the boat..

spyder
08-26-2014, 10:07 AM
i hould note, my triple x board fits in a board rack, but the bars seem so short a large bump would snap the board.

jmvotto
08-26-2014, 10:28 AM
check here.

http://www.ebay.com/sch/boarding007/m.html?_nkw=&_armrs=1&_ipg=&_from=

spyder
08-26-2014, 10:31 AM
check here.

http://www.ebay.com/sch/boarding007/m.html?_nkw=&_armrs=1&_ipg=&_from=

I saw the Kyrpt ones, look like they'd mount on the vertical tubes instead of the horizontal rail?

jmvotto
08-26-2014, 10:53 AM
call bakesonline and see if the holes line up. I have the kneeboard forks on my V2 and liked them for my IS boards plus kneeboards.

https://www.bakesonline.com/searchresult.aspx?CategoryID=852

spyder
09-02-2014, 12:18 AM
anyone make surf racks that mount in a similar fashion to replace my OEM one and whatever the other is on the other side?

http://i.imgur.com/XEwRUFXl.jpg?1

Rakkasan
05-30-2015, 09:34 PM
Bumping the thread as I'm tired of fishing out my boards from the rear lockers. Have the two racks in the pic above as well and want to replace one that would hold two surf boards.

Thanks for any input.

mjr119
06-01-2015, 07:25 AM
I am also searching for a decent surf rack. My Byerly Buzz will not fit in the OEM racks.

CamperCarl
06-01-2015, 12:31 PM
I recently bought additional racks for my LSV from DIYwake. Good quality and price. I have a triple X board as well, and it fits in the rack with the cover on it.

http://www.diywake.com/wakeboard-tower-racks

CamperCarl
06-01-2015, 12:40 PM
Try DIYwake. I recently bought a set of wakesurf racks for my triple x board. The board fits great even with the cover on. I think they have models to match your tower.

http://www.diywake.com/wakeboard-tower-racks