Integrated Bow Sac (Fly High Pro X)

[brain_rinse]

Selling an Integrated Bow Sac like this one: http://www.wakemakers.com/fly-high-integrated-bow-sac.html

Used but good condition. $175 plus shipping OBO

[Jwredmon101]

Sending PM

[Jwredmon101]

Inbox Full.. Ill take it 190 shipped!

[brain_rinse]

Cleared out my inbox. Let me know what fittings you'd like and your address.

[mcdye]

If it falls thru, let me know,,, interested.

[jmvotto]

3rd in line at the offer price...

[brain_rinse]

Bad news, guys. I found that the plastic port on the left side leg is cracked. Wakemakers tells me you can epoxy it but it will likely be a temporary fix. There is also one small spot in the vinyl material that appears to be a cut, though that would be an easier fix. I will get pics of both issues and post them tonight.

If anyone is still interested in making it work send me a PM, and I'll give you a very fair price.

[brain_rinse]

http://img.tapatalk.com/d/14/08/06/atutuvu8.jpghttp://img.tapatalk.com/d/14/08/06/yqe9usyg.jpg

[brain_rinse]

Per request, here is the bag and the plug in the damaged end. You would probably want to just epoxy your fitting of choice in place permanently. http://img.tapatalk.com/d/14/08/06/y5u4yhyt.jpghttp://img.tapatalk.com/d/14/08/06/a5a5apep.jpg

[brain_rinse]

I've patched the cut from the inside. Next step is to epoxy the port and fitting in place.http://img.tapatalk.com/d/14/08/10/hade7e6e.jpg

[bergermaister]

I have a fix for that port if you can't get it. Ripped mine completely out of an 1180 bag. Replaced with new Flow Rite bulkhead fitting. Appears to be holding just fine after beating up on it this weekend.

http://i326.photobucket.com/albums/k414/grberglund/MoombaMobiusV/63C06D40-647E-4227-BCCE-8CEFCF661E41.jpg

[brain_rinse]

Good idea berg, but I think I've got it. I used water weld to repair the port, then agin to seal the threads, and again around the inside and outside. It's water tight and I expect it to hold up for awhile now. http://img.tapatalk.com/d/14/08/12/zupujune.jpg

[brain_rinse]

I'll sand it to make it look a little better once it's fully cured but it ain't pretty. :) The water weld is pretty impressive stuff if you haven't used it before.

Anyway, I'll take $85 plus shipping if anyone is interested. I will include the fly high quick connects for each 3/4" leg port and the 1" fill port on the right leg that can all be capped if not needed. The left leg top port and center top port will include plugs.