View Full Version : Spare tire carrier

08-04-2014, 08:04 PM
Can some one please tell me how far back your spare tire bracket is from the beginning of the a frame?

08-04-2014, 08:09 PM
if you have a swinging tounge trailer, set the bracket so it swings fully open, other wise set it where it looks good

08-04-2014, 08:16 PM
Well if I set it back where the tongue swings all the way it is to far back, that's why I was wondering how they set them from the factory.2008 moomba XLV by the way.

08-04-2014, 08:22 PM
what I wrote above was how I set mine up for my 08 lsv--worked fine-no clearance issues with the boat, the 13 lsv came from the factory and it wont let the tounge swing fully open, not a big deal really

08-04-2014, 09:23 PM
20584This is how mine is set. Tongue won't fully swing open. Sorry I don't know why it is upside down but you get the idea.

08-04-2014, 09:36 PM
Can you take a quick pick of the back side?

08-04-2014, 09:53 PM
here you go.

08-04-2014, 11:15 PM
Thanks Guys!

08-05-2014, 01:19 PM
On our XLV we had the tire mounted just behind the rubber pad for the swing tongue.
Sold the boat in 2010 but from the pictures you should get the spacing. On the LSV and the Mondo the spare must go forward and interferes with the swing tongue.



Really missed this boat when I had the LSV, but not so much with the Mondo.

08-09-2014, 10:42 PM
Spare tire mount and small emergency spare with cover. Total cost approximately 150 for ecerything