PDA

View Full Version : Seat Troubles



Potsieuf
07-15-2014, 07:17 PM
Not sure if this is the right thread, but here goes. I have a 1998 mobius and the plastic mount that the seat goes on is broken. I have had no luck finding a replacement :confused: and I figured I would turn to the experts. Any help that you guys an give me would be great. :D

motosno963
07-15-2014, 08:19 PM
make an aluminum replacement ?

kaneboats
07-16-2014, 01:18 AM
I have a 1998 mobius and the plastic mount that the seat goes on is broken.

Which seat? Better yet, post a pic of the damaged mount as it might inspire some ideas.

Driver's seat, maybe?

Potsieuf
07-16-2014, 09:06 AM
It is the driver seat. I'll take a picture of it when I get home from work.

Sent from my HTC One X+ using Tapatalk

mmandley
07-16-2014, 12:45 PM
I would look into the Seaboard

http://www.eplastics.com/Marine_Board-SEABOARD

See if you can get it in 1-2inch thickness. Then cut the size you need, counter sink the screw holes and done.

I would personally stay away from metals due to damage of fiberglass.

Potsieuf
07-16-2014, 08:35 PM
20409
The back of the black plastic is broken. I don't know where to look for that.

Sent from my HTC One X+ using Tapatalk

moombadaze
07-16-2014, 10:02 PM
maybe look at some completely different, maybe look for a swivel seat base like the new Moomba's have

Potsieuf
07-16-2014, 10:13 PM
I will have to look into that. I wonder if they is an option with the engine in the middle of the boat.

moombadaze
07-17-2014, 10:17 AM
don't see why it wont work, my base is bolted into the floor, you could cut down the seat base pipe to the height you need and then have a swivel seat mod free to boot