Seat Troubles

[Potsieuf]

Not sure if this is the right thread, but here goes. I have a 1998 mobius and the plastic mount that the seat goes on is broken. I have had no luck finding a replacement :confused: and I figured I would turn to the experts. Any help that you guys an give me would be great. :D

[motosno963]

make an aluminum replacement ?

[kaneboats]

I have a 1998 mobius and the plastic mount that the seat goes on is broken.

Which seat? Better yet, post a pic of the damaged mount as it might inspire some ideas.

Driver's seat, maybe?

[Potsieuf]

It is the driver seat. I'll take a picture of it when I get home from work.

Sent from my HTC One X+ using Tapatalk

[mmandley]

I would look into the Seaboard

http://www.eplastics.com/Marine_Board-SEABOARD

See if you can get it in 1-2inch thickness. Then cut the size you need, counter sink the screw holes and done.

I would personally stay away from metals due to damage of fiberglass.

[Potsieuf]

20409
The back of the black plastic is broken. I don't know where to look for that.

Sent from my HTC One X+ using Tapatalk

[moombadaze]

maybe look at some completely different, maybe look for a swivel seat base like the new Moomba's have

[Potsieuf]

I will have to look into that. I wonder if they is an option with the engine in the middle of the boat.

[moombadaze]

don't see why it wont work, my base is bolted into the floor, you could cut down the seat base pipe to the height you need and then have a swivel seat mod free to boot