View Full Version : Swim platform pin fell out
BamaMojo
06-09-2014, 10:37 PM
Discovered Sunday after trail wring the boat that I lost the port side pin that holds the swim platform on. Anyone else experience this?
2012 Mojo
2012 Mojo
brain_rinse
06-09-2014, 11:04 PM
Both of mine disappeared last trip too. I replaced them with stainless bolts. :)
mmandley
06-10-2014, 02:47 AM
I lost one last year while on the water. I also replaced with bolts at that time
uniwarking
06-10-2014, 07:22 AM
Yes, replace the pins with stainless steel bolts and nylon lock nuts. If you've not done so already, you can also replace those set screws with SS bolts.
BamaMojo
06-10-2014, 01:33 PM
Thanks guys! Will do all Thursday.
2012 Mojo
BamaMojo
06-10-2014, 04:02 PM
Uni,
Remember what size you used?
2012 Mojo
uniwarking
06-10-2014, 07:39 PM
1/4" - 20 will fit in the set screw holes. I used a jam nut to retain the torque. I actually opted to open up the 2 two spring holes to 5/16" since they were no longer tight at 1/4". http://img.tapatalk.com/d/14/06/11/davysedy.jpg
So far it's held up to a 3 day weekend full of surfing.
Sent from my iPhone using Tapatalk
BamaMojo
06-13-2014, 02:05 PM
Got it all wrapped up on Thursday. Will be at Lake Martin all from fri-Monday testing it out!
Thanks guys!
2012 Mojo
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.