View Full Version : 07 LSV - Need new Tower Light

06-04-2014, 01:02 PM
The cheap $15 tower plastic light broke, so I need to either buy a new one (can't find where to buy it) or get something newer.

Any ideas?

06-04-2014, 01:19 PM
I put one like this on but I think I found it for about $14 somewhere. I like it because it doesn't hit anything and doesn't stick out much.


06-04-2014, 01:51 PM
What about this one? http://www.roswellwakeair.com/series_elite/wakeboard_tower_navigation_light/

06-04-2014, 02:14 PM
But don't you need some kind of base mount for this?

06-04-2014, 04:29 PM
this is the one I would like to get but it is expensive.


06-09-2014, 10:28 AM
PHOTO REQUEST: Can I please get a photo of the NAV LIGHT base at the top of the Tower. I need to know what the base looks like before I order a new light. Can't remember if it's totally round or not.

06-09-2014, 11:13 AM
This is the light in the manual…and as you see, it's on the flat bar. But this could be the old Moomba tower and not the 2007 LSV Tower. This is why I want to see a photo. Also, if I wanted to get a new light on the top of the high rope mount, the wire probably will not reach.

06-09-2014, 02:48 PM
OK so I called Moomba and evidently they made a "special unit" made by Attwood for the tower (which was made by Extreme Tower). Moomba says the replacement light is part # 104306, but it's not cheap!

The issue here is that the light is on the FLAT PART of that bay, so I can't just buy any light. Any ideas??

Here is the light.