PDA

View Full Version : 07 LSV - Need new Tower Light



canadasteve
06-04-2014, 01:02 PM
The cheap $15 tower plastic light broke, so I need to either buy a new one (can't find where to buy it) or get something newer.

Any ideas?

kaneboats
06-04-2014, 01:19 PM
I put one like this on but I think I found it for about $14 somewhere. I like it because it doesn't hit anything and doesn't stick out much.

http://www.bakesonline.com/detail.aspx?ID=1667

canadasteve
06-04-2014, 01:51 PM
What about this one? http://www.roswellwakeair.com/series_elite/wakeboard_tower_navigation_light/

canadasteve
06-04-2014, 02:14 PM
But don't you need some kind of base mount for this?

996scott
06-04-2014, 04:29 PM
this is the one I would like to get but it is expensive.

http://samsonsports.com/tower-accessories/rope-savers/

canadasteve
06-09-2014, 10:28 AM
PHOTO REQUEST: Can I please get a photo of the NAV LIGHT base at the top of the Tower. I need to know what the base looks like before I order a new light. Can't remember if it's totally round or not.

canadasteve
06-09-2014, 11:13 AM
This is the light in the manual…and as you see, it's on the flat bar. But this could be the old Moomba tower and not the 2007 LSV Tower. This is why I want to see a photo. Also, if I wanted to get a new light on the top of the high rope mount, the wire probably will not reach.

canadasteve
06-09-2014, 02:48 PM
OK so I called Moomba and evidently they made a "special unit" made by Attwood for the tower (which was made by Extreme Tower). Moomba says the replacement light is part # 104306, but it's not cheap!

The issue here is that the light is on the FLAT PART of that bay, so I can't just buy any light. Any ideas??

Here is the light.
http://www.rideaustralia.com.au/Supra_Boats_Online_Shop/item/boat-parts/lig---lighting/104306