PDA

View Full Version : ballast timer times after upgrade



nitrodude24
05-07-2014, 10:42 AM
I was wondering what you guys are running your timers at with 1100s in lockers and an ibs tied to center tank ob the LSV with the factory gravity 1800 system

mmandley
05-07-2014, 11:35 AM
I was wondering what you guys are running your timers at with 1100s in lockers and an ibs tied to center tank ob the LSV with the factory gravity 1800 system

I run 1 minute for every 100 LBS.

jmvotto
05-07-2014, 02:02 PM
I run 1 minute for every 100 LBS.

Good to know and rule of thumb.

jstenger
05-07-2014, 03:10 PM
I have my center timer set at 10 minutes.

rca
05-07-2014, 03:13 PM
I just set it really high and fill until I get venting or the sun pad pops up.

jester
05-07-2014, 06:50 PM
This depends on the pumps. I think the new Moomba's are running Jabsco pumps that are 640 GPH or 89LBS/Minute. An 1100Lbs bag will take 12.36 minutes to fill.

gscharf
05-07-2014, 06:53 PM
My plan is to stopwatch time it from empty to vent discharge and set it there. Then check to make sure that time completely empties the bags when I drain.