Stock Amp Rack

[jstenger]

I ordered my new LSV with just the standard stereo and 4 in boat speakers, and I was told that the boat would not come with the amp rack. I ordered the onboard charger, which is usually mounted to the amp rack. Does anyone know if the amp rack will now be included?

[MLA]

Not getting the stock amp rack could be a good thing. One particular tow boat manufacturer pre-cuts 3 large squares out where the amps will go, before wrapping the carpet over the board. The was is useless if your plan is to do anything other than the 3 OEM amps in the OEM arrangement. One other only cuts the rack to fit the 2 OEM options. SO again, its no use if you are doing more than 2 or larger amps then the factory offerings. Building your own allows you to lay out the components like you want.

Ive collected 3 of them, in which we cut up and use the HDPE for fabrication on other projects.

[mmandley]

I ordered my new LSV with just the standard stereo and 4 in boat speakers, and I was told that the boat would not come with the amp rack. I ordered the onboard charger, which is usually mounted to the amp rack. Does anyone know if the amp rack will now be included?

I can't speak for sure, but the Mojo when we got it was ordered as a Stock stereo with Bow Speaker option and charger. It had an amp rack, they mounted the charger, amp, circuit breaker and ground block to it.

http://i639.photobucket.com/albums/uu114/mmandley/Moomba%20Mojo/DSC_0431-1.jpg (http://s639.photobucket.com/user/mmandley/media/Moomba%20Mojo/DSC_0431-1.jpg.html)

http://i639.photobucket.com/albums/uu114/mmandley/Moomba%20Mojo/DSC_0432-1.jpg (http://s639.photobucket.com/user/mmandley/media/Moomba%20Mojo/DSC_0432-1.jpg.html)

I had to take it out because it was too small.

Slightly different now.

http://i639.photobucket.com/albums/uu114/mmandley/Stereo/Mojo%20Stereo/DSC_0950_zps60743138.jpg (http://s639.photobucket.com/user/mmandley/media/Stereo/Mojo%20Stereo/DSC_0950_zps60743138.jpg.html)


If for some reason you dont get a rack, and want one I kept my factory one and we can talk about measurements and see if it will fit.

[moombadaze]

think my amp board looked like Mikes in the above photo, I ordered the bow speakers