LEDs

[Sharpshooter]

Got started on the LEDs http://youtu.be/27uBunLIGII


2013 Moomba LSV

[Sharpshooter]

http://youtu.be/YRyXQ_A5ixk
Almost finished

2013 Moomba LSV

[parrothd]

You should add some ones that are constant, not flashing, that's painful to watch... lol...

[Sharpshooter]

I can have them on solid or dancing with the music


2013 Moomba LSV

[EricU]

I can have them on solid or dancing with the music

What controller are you using? I have the WS controller running the four tower Icon-8s and six in-boats and want to add quite a few more.

Is there a limit to how many LEDs you can hook up to a controller as the controller seems to put out 2A on each circuit of R-G-B?

[MLA]

What controller are you using? I have the WS controller running the four tower Icon-8s and six in-boats and want to add quite a few more.

Is there a limit to how many LEDs you can hook up to a controller as the controller seems to put out 2A on each circuit of R-G-B?

Yes, 2A. Its more about the total current draw per circuit, rather then the actual number of individual LEDs

[EricU]

Come on Mike, you know you need to dumb it down for me!!!

How many amps is the four Icons with rings and the six XS-650 RGBs with the additional RGB rings drawing?

When do I need to think about adding another controller? or do I need to worry?

[MLA]

Amp draw on a 16ft 300 LED roll of 3528 LEDs is 1.4 amps

Amp draw on a 16ft 300 LED roll of 5050 RGB LEDs with all 3 colors illuminated is 4.6A

If your LEDs are Wet Sounds supplied LEDs, they are 600 count p/ft

[Sharpshooter]

http://img.tapatalk.com/d/13/11/07/sazenypu.jpg
This is what I am using
www.oznium.com


2013 Moomba LSV

[Sharpshooter]

Time to start on the transom lights, got two of these for $145 seems like good quality heavy stainless steel housinghttp://img.tapatalk.com/d/14/01/13/udusa7e9.jpg


2013 Moomba LSV

[deerfield]

This is what I'm wanting to see.



Time to start on the transom lights, got two of these for $145 seems like good quality heavy stainless steel housinghttp://img.tapatalk.com/d/14/01/13/udusa7e9.jpg


2013 Moomba LSV

[Sharpshooter]

Iam going to try and get them in some water wed. or thur. and see what they look like

[Sharpshooter]

Got the transom lights installed, http://img.tapatalk.com/d/14/02/08/y6u8e4yj.jpgnow I just need spring to get herehttp://img.tapatalk.com/d/14/02/08/zehy6yge.jpg


2013 Moomba LSV