View Full Version : Trailer reverse lockout
parrothd
10-29-2013, 05:31 PM
Can't believe how niffty this thing is, it should come standard... Another member posted it, no more messing around.
Sent from my Nexus 4 using Tapatalk
mikenehrkorn
10-29-2013, 05:37 PM
I got one too based on that same recommendation -- best $10 I ever spent!!
lsvboombox
10-29-2013, 05:48 PM
Not sure why they dont come with the moombas every other a60 actuator trailer i bought they came standard
parrothd
10-29-2013, 06:01 PM
I didn't know it was available, I've been using nickles and other crap combined with tape..
Sent from my Nexus 4 using Tapatalk
Sharpshooter
10-29-2013, 06:09 PM
Where can you buy them
2013 Moomba LSV
lsvboombox
10-29-2013, 06:19 PM
[QUOTE=Sharpshooter;231339]Where can you buy them
2013 Moomba LSV[/
It a ufp lockout cap
You can get them online for like 10
KSmith
10-29-2013, 06:22 PM
Where can you buy them
2013 Moomba LSV
I got mine directly from the boatmate website. I ordered mine the same day I brought my boat home and couldn't back the damn thing up the hill, the adapter I was given wasn't wired right and wouldn't lockout brakes in reverse.
lsvboombox
10-29-2013, 06:23 PM
I got mine directly from the boatmate website. I ordered mine the same day I brought my boat home and couldn't back the damn thing up the hill, the adapter I was given wasn't wired right and wouldn't lockout brakes in reverse.
Dont buy feom boatmate the are twice as much than othe site
parrothd
10-29-2013, 06:59 PM
Amazon..
http://www.amazon.com/gp/aw/d/B006UH5ZSY
Or
http://www.pacifictrailers.com/UFP-A-60-Top-Lockout-Upgrade-34359-A-60-Brake-Lockout-Cap-/
Sent from my Nexus 4 using Tapatalk
EricU
10-29-2013, 08:57 PM
Can't believe how niffty this thing is, it should come standard... Another member posted it, no more messing around.
I have seen that thing on the different trailer part websites as I need a cap for one of my trailers.
How does it work? I know you turn it! What is actually doing the lock out?
lsvboombox
10-29-2013, 09:17 PM
I have seen that thing on the different trailer part websites as I need a cap for one of my trailers.
How does it work? I know you turn it! What is actually doing the lock out?
If you liok at the a60 in the attached link you will see a cutout above the reservoir. This lockout basically will slide into that cut out and freeze the unit
http://www.bakesonline.com/detail.aspx?ID=849
mikenehrkorn
10-30-2013, 08:14 AM
Got mine from TrailerandTruckParts.com -- $10 + shipping..........best price I found
Jer119
10-30-2013, 09:28 AM
Looks like a must! I bought my boat and brought it to a yard to store. So here I was trying to back it up and like, WTH? It's Minnesota, it was dark out, wet, and cold by the time I was attempting this. So I told the girlfriend to get in the truck and back up. Of course, there was nothing to stop the hitch. I found a 5/16 bolt with a nut and adjusted it to fit the gap, then just happened to find some wire and there ya have it. Good thing there are still some good old things laying around old farm yards.
mikenehrkorn
10-30-2013, 09:47 AM
Looks like a must! I bought my boat and brought it to a yard to store. So here I was trying to back it up and like, WTH? It's Minnesota, it was dark out, wet, and cold by the time I was attempting this. So I told the girlfriend to get in the truck and back up. Of course, there was nothing to stop the hitch. I found a 5/16 bolt with a nut and adjusted it to fit the gap, then just happened to find some wire and there ya have it. Good thing there are still some good old things laying around old farm yards.
I had a similar problem...........the storage place I use is basically a huge farm and uses a Bobcat to move all the boats around and has no wiring harness let alone a 5 wire hookup to defeat the backup "feature".
Once again another "feature" that turns into a huge PIA!!!
trayson
10-30-2013, 01:38 PM
What trailers does this work with? I have a SMP trailer on my 92 Supra. It has the spot for the side lockout, so that's what I assumed I'd have to use. Correct?
https://imageserv3.team-logic.com/mediaLibrary/159/medlockout_bracket.jpg
lsvboombox
10-30-2013, 01:40 PM
What trailers does this work with? I have a SMP trailer on my 92 Supra. It has the spot for the side lockout, so that's what I assumed I'd have to use. Correct?
https://imageserv3.team-logic.com/mediaLibrary/159/medlockout_bracket.jpg
That looks like a ufp a60 setup. If you have a plastic cap to access the reservoir then it should work. Replace the the plastic cap with the ufp lockout
trayson
10-30-2013, 01:56 PM
That looks like a ufp a60 setup. If you have a plastic cap to access the reservoir then it should work. Replace the the plastic cap with the ufp lockout
Yes, I have a plastic cap for my reservoir in the same location as you guys have pictured previously. I'll take a closer look at it soon.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.