Scratches on boat moomba mojo 2.5 2013

[Hunter92]

Well we just recently purchased a moomba and we noticed several scratches on the back of the boat where you would put your wakeboard on. This is probably due to the fact we have a black bottomed boat so we found a way to prevent the boat from being scratched all to pieces in the back. Place some type of pad back there so your wakeboard, surfboard, etc. hits that instead of your boat. Here's 2 pictures of what we put back there and it's done a good job staying in place and doesn't look bad at all. Almost looks factory made. 1803518036

[kaneboats]

Looks cool! Better alternative than the clear sheet stuff.

[moombadaze]

Looks cool! Better alternative than the clear sheet stuff.

agreed........

[Sharpshooter]

Looks great, I've had my new LSV for 3 weeks and already have scratches in the same place from the kids sitting and putting on the boards, what exactly did you use

[jmvotto]

Yes what is that material?

[Hunter92]

It's called, Self adhesive rubber safety step treads, I bought it at a harbor freight. Cost 3 dollars a piece and I bought 3 of them. There 4 inches high. I don't know how long they are. Probably like a foot a piece.

[wolfeman131]

you can get the same at WalMart.

or, threaten your riders with being left floating in the lake/river if they bang their board into the boat.