PDA

View Full Version : Blower motor help



MarkH
07-21-2013, 08:41 PM
Got a 02 outback, blower motor went out in. Pulled the back cover an it's got 2 vent hoses but only 1 motor. Is that right or does it need 2 motors? Bought the boat used so didn't know if it needed another. Also how far up the floor should the vent hoses go? 1 with the motor attached goes under floor, there's a PVC pipe there but it's not attached to the flex pipe should it be? The other flex line just vents in the rear compartment, is this the way it's suppose to be? Anyone know?

jmb
07-21-2013, 08:44 PM
You will only have one motor. The rest are just vent hoses

MarkH
07-22-2013, 09:14 AM
Does the vent hose need to run up to the engine area? From the blower mine just goes to floor and stops, there's a PVC pipe there that goes to engine area that looks like flex hose should be attached to, but its not.

moombadaze
07-22-2013, 09:29 AM
your blower motor should be attached with a slinky looking black hose that should be attached to the vent