Prop shaft packing

[rsinger]

Yes it seems this subject has been flogged to death. I need to do mine and have never done one before. I looked on both the Moomba and Supra forums, but stumbled on this "diamond", using google. It's great pictures of what's involved and a pretty detailed explanation on how to do it. So I though I would share. I haven't run across this in any of the forums.

http://www.pbase.com/mainecruising/stuffing_box&page=1

Hope someone else finds it helpful too.

Thanks to DOCDRS for his help to this point. He had a bunch of good stuff on the forums about this.

[Garn]

I have an 07 Mobius LS with the dripless shaft. Is the packing the same on a dripless? Do you change it the same way?

Garn

[rsinger]

I have an 07 Mobius LS with the dripless shaft. Is the packing the same on a dripless? Do you change it the same way?

Garn

I don't know. Haven't looked at drip less, as mine is the same as the link I provided.

[mcdye]

I have an 07 Mobius LS with the dripless shaft. Is the packing the same on a dripless? Do you change it the same way?

Garn

There is no packing to worry with with a dripless setup.

[Garn]

If there is no packing on a dripless shft, but it is leaking, what do I fix/replace?

[86century]

if memory serves me. the dripless has a water cooled rubber seal.

[trayson]

that is a pretty amazing writeup.

[bkearney]

I used that write up, and it helped alot. The one thing I found on an 03 was that the Goretex was a bit smaller they the flax, and was alot easier to use. So.. go with the new fancy stuff and it will be alot easier.