EricU
05-24-2013, 10:08 PM
Soooo, I have a new project boat that I going to install a complete new stereo.
What I am thinking of is;
Reuse my 12 JL Audio W6 sub in its existing sealed box and build it in the helm support (possible ported) after the season is over.
Reuse my Pro Mariner 20 on-board charger
Head Unit:
Kenwood KMR-700U Head Unit
Kenwood KCA-RC55MR wired remote
Sirius adapter
Tower Speakers;
Two sets (4 total) Wet Sounds Icon8s
Black
Fixed Clamp
LED Ring RGB
Translucent Grills
In-Boats:
Three sets (6 total) Wet Sounds XS-650-RGB
LED Rings-RGB
Wet Sounds WS-420sq zone control
(1)LED controller The new one that plugs in-line with the LFE RCA (Is that all I need?)
Amps;
Towers Kicker KXM400.2 Should I go to the KXM400.4? I cant find the specs on these new Kicker marine amps. Will the KXM400.4 give me more power at the towers? (Phil?? Mike?? Anyone??)
Inboats and Sub Kicker KXM800.5 (The W6 is wired for a 2 ohm load)
What I am thinking of is;
Reuse my 12 JL Audio W6 sub in its existing sealed box and build it in the helm support (possible ported) after the season is over.
Reuse my Pro Mariner 20 on-board charger
Head Unit:
Kenwood KMR-700U Head Unit
Kenwood KCA-RC55MR wired remote
Sirius adapter
Tower Speakers;
Two sets (4 total) Wet Sounds Icon8s
Black
Fixed Clamp
LED Ring RGB
Translucent Grills
In-Boats:
Three sets (6 total) Wet Sounds XS-650-RGB
LED Rings-RGB
Wet Sounds WS-420sq zone control
(1)LED controller The new one that plugs in-line with the LFE RCA (Is that all I need?)
Amps;
Towers Kicker KXM400.2 Should I go to the KXM400.4? I cant find the specs on these new Kicker marine amps. Will the KXM400.4 give me more power at the towers? (Phil?? Mike?? Anyone??)
Inboats and Sub Kicker KXM800.5 (The W6 is wired for a 2 ohm load)