View Full Version : Seadek on Mojo Bow

02-08-2013, 10:14 AM
Looking at the 2013 Mojo pics from the website, it seems there are two seadek pads on the bow?

Anyone try ordering these for a 2012 Mojo? I dont normally climb over the bow (because its so slick) but this would help if ever needed.

Would I be better off contacting SC or going through dealership?


02-08-2013, 11:55 AM
Go thru Cynde @ Atlanta Marine. 678-541-6609

Those were part of the "non-skid" option package and it's not Seadek. It is the same material on your swim deck. I don't know if you can just get the ones for the front as the package includes pads for other areas. I believe there is a pad that goes in the driver's footwell and on each gunnel by the tower. It might even include something for the trailer, but I'm not sure.

02-08-2013, 12:23 PM
Do these have "Moomba" etched into them at all?

02-08-2013, 12:35 PM

02-08-2013, 12:42 PM
and on each gunnel by the tower. .

wish they had this for the LSV

02-08-2013, 01:03 PM
Do these have "Moomba" etched into them at all?

If I remember right, the one in the footwell does, the others don't

wish they had this for the LSV

While the ones on the bow wouldn't work, the others might. I'll zip a note off to SC and see what they think.

02-08-2013, 01:32 PM
On the 2013 LSV, the nonskid package includes a Moomba etched pad at the footwell and the step pads near the base of the tower on the deck.

The 2013 Mojo has the same, but also includes the two nonskid pieces on the nose. The 2012 Mojo had the same option.

These nonskid pads are available to order through any dealer. The kit for the LSV is part number 113093 and the kit for the Mojo is 112522.

02-08-2013, 02:08 PM
ahhhh, the SC trolls are on the board today!

Thanks for the update Jon. Don't suppose we could get you to post up some pics of the kits?

02-08-2013, 02:36 PM
There aren't any boats currently going through the line with this option but I have attached a few pictures from boats online of this option. This is shown on a 2013 LSV.



02-08-2013, 05:22 PM
will those work on the 2012 xlv, dont need the footwell pad, its an sub now..

I likey the new steering wheel for '13 i tried to order the supra whhel on the xlv and no go at the factory