View Full Version : Loose tower bolts
09-02-2005, 10:15 AM
Make sure to check all of your tower bolts. They may seem to be OK from checking the outside by tightening with a phillips screwdriver, but don't trust that alone. Not a single nut was tightened all the way and some of them I could turn with my fingers. I just bought the boat new this year. Surely wakeboarding hasn't loosened them that much. You will need an 11MM deep well socket.
09-02-2005, 11:45 AM
But do not overtighten or we will be seeing cracks in the gelcoat.
Hope this helps
09-02-2005, 03:21 PM
yep, mine were loose as well mis summer but I had checked them new and semi regular and I believe they did work loose. I tried to get them tight but not too tight, I was afraid too tight might also crack the gel coat. Anyone have some torque advice here?
oops distracted for hours and Butta beat me.
Powered by vBulletin® Version 4.2.3 Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.