View Full Version : rub rail
08-29-2005, 01:48 PM
I did a search and could not find anything on this topic.
What is the best/correct way to install a rub rail insert for a 99 mobius?
redmobius, i replaced my entire rubrail, not just the insert. it was a job...
but on the insert the best way i found was to soak the insert in hot water in the bathtub with some dish soap. that allows it to slid in very easy and makes it soft.
hope that helps.
08-30-2005, 07:09 AM
I replaced the insert by laying the lower edge in the groove, then hitting the top edge with a rubber hammer. Worked it around the boat like that.
The hot water, soap method sounds better.
Powered by vBulletin® Version 4.2.3 Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.