PDA

View Full Version : Switch Covers?



EricU
11-05-2012, 09:14 PM
I saw Harmsway's post (https://forum.moomba.com/showthread.php?17560-Custom-rocker-cover-for-electrical-switch&highlight=otrattw) about some custom switch covers that looked awesome by the guys at OTRATTW. (http://www.otrattw.com/)

Are my switches below the right ones? Sorry for the poor cell phone pic!
If so, any suggestions on the PerfectPass switch?
And do I just yank the covers off? or what is the correct way to remove the switch cover?


Thanks for any help, Eric.

dhyams
11-05-2012, 11:43 PM
Yes, it looks like your switches are the right ones. I think, though, that otrattw only etches black switches, so your new switches would be black.

On the Perfectpass switch maybe the switch for "cruise"? I'll try to find one in a bit.

The covers pop off if you work them carefully with a small slotted screwdriver. If you want to wait, though, otrattw sends you a special little plastic removal tool.

There's also this thread for more discussion on this...

https://forum.moomba.com/showthread.php?19222-Do-contoura-V-switches-fit&highlight=contoura

dhyams
11-05-2012, 11:48 PM
OK, here is a cruise control icon, in this document, page 38, top left. You can have them put that icon and the words "PERFECT PASS" if you want.

http://www.carlingtech.com/sites/default/files/documents/Carling-RS-V%26L-Series-Markings.pdf

EricU
11-06-2012, 12:19 AM
OK, here is a cruise control icon, in this document, page 38, top left. You can have them put that icon and the words "PERFECT PASS" if you want...

Dhyams, thanks. I was just posting these better pics when I saw your responses!!

Thanks again, Eric.

1650816507

dhyams
11-06-2012, 09:16 AM
Good deal...note that otrattw's switches will also not have the red lenses. See this thread for pics of what they will look like:

https://forum.moomba.com/showthread.php?19222-Do-contoura-V-switches-fit&highlight=contoura

In case it will help you out, this is exactly what I sent to otrattw (formatting is a little messed up, but you get the gist):

================================================== ========


I'd like to order these, all Contoura V rocker switch covers, no indicator bars except as noted.


WORD IMAGE NOTES
================================================== ===========
NAV/ANC D2
BILGE AJ
BLOWER AF
STEREO 2F
AMP speaker icon from here: http://www.otrattw.com/proddetail.php?prod=VVPZC2G-500
LIGHTS AC indicator bar on top and bottom
ACC A5 indicator bar on top and bottom

I got the picture codes from this document: http://www.carlingtech.com/sites/default/files/documents/Carling-RS-V%26L-Series-Markings.pdf