Installing Power Inverter - where?

[bergermaister]

Decided I'm going to add a power inverter before next season. Wiring it will be the easy part; I'm wondering where you guys who have already done this have them installed for easy access?

Kind of debating having it right inside a compartment or adding some sort of outlet with sealed cover near a drink holder or something for easier access right in the cabin.

Or maybe just leave a small extension cord plugged in to it down in the compartment and pull that out to plug in to when needed?

[jmvotto]

Margarita's anyone?

[wolfeman131]

Berg, that sounds like a whole lot of work. Why not just throw one of these in the glovebox for when 110 is needed?

http://www.amazon.com/dp/B0083CJ7CY/ref=asc_df_B0083CJ7CY2074523?smid=A3E5K6GEFSI075&tag=nextagusmp0365711-20&linkCode=asn&creative=395129&creativeASIN=B0083CJ7CY

[bergermaister]

Got one but it doesn't put out enough to run the 110v tube inflator (or the blender). I'm amazed how much faster that blower is than my stupid, over rated, over priced Connely Tube Gun.

I don't think it will be much work - just trying to go for the most convenient setup.

[kaneboats]

Welcome to amateur hour. How is he gonna power the DTV box and the LCD with that little thing?

[wolfeman131]

Got one but it doesn't put out enough to run the 110v tube inflator (or the blender).


How is he gonna power the DTV box and the LCD with that little thing?

Kane, I can TOTALLY respect where you're coming from.

Berg, I hope you can redeem yourself from that post with a good one regarding beer.

[kaneboats]

LOL! You're right. Berg just needs a plug in cooler to keep his sixer of Zima cool, right?

[bergermaister]

Ok, I'm actually look for a place I can plug this in...

http://uncrate.com/p/2006/12/sanyo-kegerator.jpg

And the motorized stripper pole won't run on 12v.

[wolfeman131]

Correct. He'd hate those 3 he can't finish to get warm and skunk.

[wolfeman131]

Ok, I'm actually look for a place I can plug this in...

http://uncrate.com/p/2006/12/sanyo-kegerator.jpg

REDEMPTION!!!

Proud of you, man.

[kaneboats]

You friggin' kill me. That's my new line:::: "I wouldn't want my left over ZIMAs to get skunky!"

[wolfeman131]

Actually, I can't take credit for that one. I heard Dusty tell his wife that as they were packing up at the TX Jam.

[jester]

Berg, Our water temp is cold enough to just put the Keg under the swim platform too keep it cool. Also they make DC blenders. Also making the kids blow up the tubes by hand works great to decrees the amount of tubing done. They make a DC pump for that also if your nice to the kids.

[moombadaze]

Ok, I'm actually look for a place I can plug this in...

http://uncrate.com/p/2006/12/sanyo-kegerator.jpg

And the motorized stripper pole won't run on 12v.

I want to go boating with Berg

[bergermaister]

Also making the kids blow up the tubes by hand works great to decrees the amount of tubing done.

This I like.

[motosno963]

gotta make them work before they can play haha..and when you find a place to put that beast let me know so i can do the same haha

[lsvboombox]

Why not buy a gas blender and have dusty's mom blow your tube. I mean blow up your tubes