View Full Version : V drive sensor
Cactus371
07-19-2012, 05:35 PM
How can I test the oil sensor on the v drive. My v drive light is coming on oil level is good.
ga-lsv05
07-19-2012, 05:40 PM
Coming on above 1200 rpms?
2005 mobius lsv 2900lbs ballast
Cactus371
07-19-2012, 06:17 PM
It stays on all the time no matter the rpm.
ga-lsv05
07-19-2012, 06:22 PM
From what I gather, its a simple on off pressure switch like an oil pressure sender. With no pressure on it you should see less than 1 ohm across it and an open circuit pressurized. Using a dvom
2005 mobius lsv 2900lbs ballast
Cactus371
07-19-2012, 07:01 PM
Thanks I'll test it tonight
Chandosdave
08-13-2012, 01:36 PM
Were you able to determine if the sensor was the issue, or is there a different problem?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.