jmvotto..

[motosno963]

your inbox is full..how copy?

[motosno963]

ohh and also i have the older model fat seat that i bought used from a guy on craigs so i just have the twist cap on my bag and no connector for the quick connect

[jmvotto]

mail box emptied. i have a bunch of the 730 pm me your address i will send you one.
i assumed you had one with the bag

Joe

[motosno963]

good copy..message coming your way

[motosno963]

the only thing i dont get about the W730 is on my ballast thw twist is on the outside for a cap..ill have to double check when i get home and see if there is the twist on the inside of one of them

[jmvotto]

if you have the 731 plug it wont twist into that , if it about two inches tall it should work and its the 730 adapter

[motosno963]

i wish i was home i could upload some pics..it doesnt have the 731 cap..its almost like the opp., instead of having the threads on the inside and using the 731 to cap it, it uses a cap almost like a pepsi bottle it threads on over the opening if you get my drift

[jmvotto]

So it's a male to male thread with a cap.
Is this it.

http://www.wakemakers.com/launch-pad-cap-plug-set.html

[motosno963]

yupp like that..i have the older fat seat that has the back rest and cup holders.. my friends love sitting on it when we are relaxing on the boat..like a water bed u can sleep on the thing haha

[jmvotto]

Is it a fly high fat sac or a straight line sumo sac?

Got any pics

[motosno963]

old school fly high fat seat..once i get home around midnight ill upload the pics i have of the seat..i work till 1130

[jmvotto]

Cool I will check it out sometime tomorrow.

Post a pic of the threaded hole with out the cap and adapter

[motosno963]

ok ill post up some pics in a few..i have no problem filling it up right now..its the draining that will be bad..cause right ow if i open the bag the water will just go everywhere

[motosno963]

i will get some more up in the morning..i know my seats are bad..i have to get all my seats redone
1522815229

[jmvotto]

Need a close up of the fill and empty screw on on the old fly high seat.

From those above pics you may need to create an adapter at lowes to accept the twist connect for the tsunami pump.

Maybe wakemakers has a special adapter too.

[motosno963]

i was looking on wake makers and didnt really see anything..i like making stuff so illtake it to lowes and see if i can make an adaptor..and somehow i already lost a cap so now ill have to order those caps from wake makers..we did a over haul saterday eve/night and did some cleaning up and reupholstering in the boat and somehow one of the caps disapeared

[motosno963]

jmvotto..couldnt really find anything so i made a attachment fom the quick connect and 2 other parts from lowes..about 3$ to make
154051540615407

[jmvotto]

so how does that attache to the bag, looks like the quick twist is inside the white pvc adapter?

[motosno963]

it was impossible to find something that would screw onto the bag..i took the cap with me to lowes and its an odd female cap..the cap wont screw on a 3/4th male end cause its to big and the next size higher is 1" and the cap is a tad to small to screw onto that so i made that piece that i glued onto the quick connect..the one i made is to drain the bag..it screws onto the tsunami and the grey piece will slide into the ballast and suck the water out..ill take a pic in a few

[motosno963]

thats what i made
1541615417

[jmvotto]

I think i got it. you old fly high uses the blue fitting. didnt wake makers give you any direction on this.( old with the new)
Convert your Launch Pad, Skylon, or older Fly High sacs that use the perfect union (blue water bed fitting) connection to the new Fly High Quick Twist Connect System used with the Fly High Pro X Series Tsunami Ballast Pump (http://www.wakemakers.com/fly-high-tsunami-pump.html)

http://www.wakemakers.com/perfect-union-conversion.html


you should be able to fill and drain from this port.

[motosno963]

i guess ill order that when i order a bag for the walk way in the boat..need to bring the front down with all that 1150lbs of water in the back haha