View Full Version : TOWER SCREWS

07-05-2005, 10:00 PM
I was recently doing maintenance on my new LSV and went to make sure the screws around the tower mounts were tight. As I was checking the tightness I noticed that 1-2 screws and in 1 case 3 screws just turned freely and didnt get any tighter at all. Is this normal and has anyone had a similar experience. Thanks in advance

07-06-2005, 01:55 AM
These are not actually screws, they are bolts. there is a backing plate and nuts inside of the hull. If your still under warranty have the dealer tighten everything up.